Paragraph 4 6A002
Non—space—qualified single—element or non—focal—plane multi—element semiconductor photodiodes or phototransistors having both of the following:
A peak response at a wavelength exceeding 1,200 nm; and
A response time constant of 0·5 ns or less;
Multispectral imaging sensors designed for remote sensing applications, having either of the following characteristics–
An Instantaneous—Field—Of—View (IFOV) of less than 200 microradians; or
Specified for operation in the wavelength range exceeding 400 nm but not exceeding 30,000 nm; and
Providing output imaging data in digital format; and
Space—qualified; or
Designed for airborne operation and using other than silicon detectors;
Direct view imaging equipment operating in the visible or infrared spectrum, incorporating either of the following:
Image intensifier tubes specified in sub—head a.2. of this entry; or
Focal plane arrays specified in sub—head a.3. of this entry;
Technical Note: In this entry `direct view' refers to imaging equipment, operating in the visible or infrared spectrum, that presents a visual image to a human observer without converting the image into an electronic signal for television display, and that cannot record or store the image photographically, electronically or by any other means.
Note: Head c. of this entry does not specify the following equipment incorporating other than GaAs or GaInAs photocathodes:
Industrial or civilian intrusion alarm, traffic or industrial movement control or counting systems;
Medical equipment;
Industrial equipment used for inspection, sorting or analysis of the properties of materials;
Flame detectors for industrial furnaces;
Equipment specially designed for laboratory use.
Special support components for optical sensors, as follows:
Space—qualified cryocoolers;
Non—space—qualified cryocoolers, as follows:
Closed cycle with a specified Mean—Time—To—Failure (MTTF), or Mean—Time—Between—Failures (MTBF), exceeding 2,500 hours;
Joule—Thomson (JT) self—regulating minicoolers with bore (outside) diameters of less than 8 mm;
Optical sensing fibres:
Specially fabricated either compositionally or structurally, or modified by coating, to be acoustically, thermally, inertially, electromagnetically or nuclear radiation sensitive; or
Modified structurally to have a beat length of less than 50 mm (high birefringence).
Notes on Sensors and Lasers
Footnotes
- f1
-
See also Entry 6A203.