OpenLegislation

Paragraph 6 The smouldering cigarette test specified in BS 5852: Part I shall be conducted subject to the following modifications.F1

United Kingdom

Where seams are exposed as part of the design of the covering material, at least one seam in respect of each test to be conducted shall be so aligned on the test rig that it crosses the junction of the back and the seat at approximately right angles thereto and not less than 50 mm from the nearest side edge, and the test (or, in the case of a test which is repeated, the first test) shall be conducted with the cigarette placed across the seam at that junction.

Annotations

Textual amendments

F1

Words in Sch. 4 Pt. 1 substituted (1.3.1990) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 1989 (S.I. 1989/2358), regs. 1(2), 9(c)

Notes on Schedule 4

Textual amendments

F1

Sch. 4 shoulder note substituted (1.3.1990) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 1989 (S.I. 1989/2358), regs. 1(2), 9(a)

Commencement

I1

Sch. 4 in force at 1.11.1988, see reg. 1(2)(a)

Notes on Part

Textual amendments

F1

Sch. 4 Pt. 1 heading inserted (1.3.1990) by The Furniture and Furnishings (Fire) (Safety) (Amendment) Regulations 1989 (S.I. 1989/2358), regs. 1(2), 9(b)