Regulation 16 Technical documentation and conformity assessmentE1

England, Wales and Scotland

Before placing a safety component for lifts on the market, a manufacturer must—

(a)

have a relevant conformity assessment procedure carried out; and

(b)

draw up the technical documentation referred to—

(i)

for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(a) or 48(b) is being carried out, in point 3 of Part A of Module B in F1Schedule 11;

(ii)

for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(c) is being carried out, in point 3.1(d) of Module H in F2Schedule 14.

Annotations

Textual amendments

F1: Words in reg. 16(b)(i) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 10(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2: Words in reg. 16(b)(ii) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 10(b) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Extent

E1: This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only