Regulation 26 Requirements which must be satisfied before an importer places a safety component for lifts on the marketE1

England, Wales and Scotland

(1)

Before placing a safety component for lifts on the market, an importer must ensure that—

(a)

a relevant conformity assessment procedure has been carried out by the manufacturer;

(b)

the manufacturer has drawn up the technical documentation;

(c)

the safety component for lifts—

(i)

bears the F1UK marking; and

(ii)

is accompanied by the F2... declaration of conformity and any required labels; and

(d)

the manufacturer has complied with the requirement in regulation 19 (labelling and instructions).

(2)

In paragraph 1(c)(ii), “required labels” means any labels that are required to be attached to the safety component for lifts pursuant to regulation 19(3).

Annotations

Textual amendments

F1: Word in reg. 26(1)(c)(i) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 17(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2: Word in reg. 26(1)(c)(ii) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 17(b) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Extent

E1: This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only