OpenLegislation

Regulation 24 Unit of measurementI1

Northern Ireland Not yet in force

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

(1)

The unit of measurement to be used in marking a dipstick shall be either the litre or the gallon.

(2)

The unit shall be marked on the dipstick at each end of the scale referred to in Regulation 28, beneath the crosspiece on the graduated face of the blade in letters and figures not less than 6 mm high.

(3)

Where the unit of measurement is the litre, if the number of digits on any marking would exceed four (9999) the marking may read “litres x 10” or “litres x 100”.

Annotations

Commencement

I1

Reg. 24 in operation at 7.5.1984, see reg. 1(1)(a)