OpenLegislation

Regulation 59 Placing of stamp on dipstick measuring systemsI1

Northern Ireland Not yet in force

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

In the case of a dipstick measuring system the stamp shall be placed on the graduated face of the dipstick blade adjacent to the line 50 mm below the datum face referred to in Regulation 27 or, where applicable, on the metal rivet referred to in Regulation 22, and adjacent to the datum surface.

Annotations

Commencement

I1

Reg. 59 in operation at 7.5.1984, see reg. 1(1)(a)