OpenLegislation

Regulation 57 F1

United Kingdom

Original text. Later amendments are not shown.

(1)

Save in a case of measuring equipment imported from F2a member State or an EEA State, no measuring equipment shall be passed as fit for use for trade unless—

(a)

it complies with all the appropriate requirements of these Regulations; and

(b)

on testing it falls within the prescribed limits of error.

(2)

In the case of measuring equipment imported from a member State or an EEA State, no measuring equipment shall be passed as fit for use for trade unless—

(a)

where the requisite documentation is presented in accordance with Regulation 55A above, the test report recites and the test data confirm to the satisfaction of the inspector that on testing in accordance with provisions of the law of a member State or EEA State it fell within limits of error which afford in use at least an equivalent standard to the prescribed limits of error;

(b)

it complies with all the other relevant requirements of these Regulations; and

(c)

the inspector is of the opinion that it is not constructed in a manner which facilitates fraudulent use and that it does not bear any inscriptions which might cause confusion in use.

Annotations

Textual amendments

F1

Reg. 57 substituted (29.12.1995) by The Measuring Equipment (Liquid Fuel Delivered from Road Tankers) (Amendment) Regulations 1995 (S.I. 1995/3117), regs. 1, 2(4)

F2

Words in reg. 57 substituted (31.12.2020) by The Weighing and Measuring Equipment and Meters (Amendment of Secondary Legislation) (EU Exit) Regulations 2018 (S.I. 2018/1387), reg. 1(2), Sch. para. 2(3); 2020 c. 1, Sch. 5 para. 1(1)