Regulation 69 Enforcement noticesE1

England, Wales and Scotland

(1)

This regulation applies where a competent authority has reasonable grounds for considering that an economic operator on whom a compliance notice has been served by the competent authority has failed to comply with that notice.

(2)

The competent authority may serve a notice (“an enforcement notice”) on the economic operator which must—

(a)

be in writing;

(b)

describe the regulated measuring instrument to which it relates in a manner sufficient to identify that instrument;

(c)

specify, with reasons, the respects in which, in the opinion of the competent authority, the compliance notice has not been complied with; and

(d)

specify the steps that the economic operator must take to comply with the compliance notice; and

(e)

specify the date, being not less than 21 days from the date of the notice, by which the economic operator to whom the notice is given is required to comply with it.

(3)

An enforcement notice may impose either or both of the following requirements—

(a)

that the regulated measuring instrument is to be withdrawn from the market unless the steps referred to in paragraph (2)(d) are taken; or

(b)

that the placing on the market or putting into use of the regulated measuring instrument is to be prohibited or restricted unless the steps referred to in paragraph (2)(d) are taken.

(4)

Where an enforcement notice is served by a competent authority other than the Secretary of State, it must at the same time as it serves that notice send a copy of the notice to the Secretary of State.

(5)

If the Secretary of State is of the opinion that consideration ought to be given as to whether a certificate or notification which is granted by F1an approved body should be withdrawn, the Secretary of State must inform F2that approved body of that fact.

F3(6)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations

Textual amendments

F1: Words in reg. 69(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 27 para. 43(a)(i) (with Sch. 27 para. 50(a)) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2: Words in reg. 69(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 27 para. 43(a)(ii) (with Sch. 27 para. 50(a)) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3: Reg. 69(6) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 27 para. 43(b) (with Sch. 27 para. 50(a)) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Extent

E1: This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only