Regulation 12 Conformity with Community requirements
The employer shall ensure that an item of work equipment conforms at all times with any essential requirements, other than requirements which, at the time of its being first supplied or put into service on a ship to which these Regulations apply, did not apply to work equipment of its type.
In this regulation “essential requirements”, in relation to an item of work equipment, means requirements relating to the design and construction of work equipment of its type in any of the instruments listed in the Schedule (being instruments which give effect to Community directives concerning the safety of products).
Work equipment which carries a CE marking shall be taken to comply with the provisions of a Community directive, provided that the CE marking is relevant for the purpose for which the equipment is to be used.
In paragraph (3), reference to a CE marking shall include the marking for an alternative standard which provides, in use, equivalent levels of safety, suitability and fitness for purpose.
Notes on the whole SI
Textual amendments
- F1
1972 c.68; by virtue of the amendment of section 1(2) of the European Communities Act by section 1 of the European Economic Area Act 1993 (c.51) regulations may be made under section 2(2) of the European Communities Act to implement obligations of the United Kingdom created or arising by or under the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 (Cm 2073) as adjusted by the Protocol to the Agreement signed at Brussels on 17th March 1993 (Cm 2183).
- F2
1995 c.21; sections 85 and 86 were amended by the Merchant Shipping and Maritime Security Act 1997 (c.28), section 8, and are applied to hovercraft by the Hovercraft (Application of Enactments) Order 1989 (S.I. 1989/1350) to which there are amendments not relevant to these Regulations.
- F3