Regulation 21 Control systems
The employer shall ensure that all control systems of work equipment are safe, taking into account any risks to health or safety which might result from damage to, or breakdown of, the control system.
Without prejudice to the generality of paragraph (1), a control system is not safe unless—
its operation does not create any increased risk to health or safety;
it ensures, so far as is reasonably practicable, that any fault in or damage to any part of the control system or the loss of supply of any source of energy used by the work equipment cannot result in additional or increased risk to health or safety;
it does not impede the operation of any control required by regulation 18 or 19.
Notes on the whole SI
Textual amendments
- F1
1972 c.68; by virtue of the amendment of section 1(2) of the European Communities Act by section 1 of the European Economic Area Act 1993 (c.51) regulations may be made under section 2(2) of the European Communities Act to implement obligations of the United Kingdom created or arising by or under the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 (Cm 2073) as adjusted by the Protocol to the Agreement signed at Brussels on 17th March 1993 (Cm 2183).
- F2
1995 c.21; sections 85 and 86 were amended by the Merchant Shipping and Maritime Security Act 1997 (c.28), section 8, and are applied to hovercraft by the Hovercraft (Application of Enactments) Order 1989 (S.I. 1989/1350) to which there are amendments not relevant to these Regulations.
- F3