Paragraph 3.5 Liferaft Fittings
The liferaft shall be fitted with water pockets complying with the following requirements:
The cross-sectional area of the pockets shall be in the shape of an isosceles triangle with the base of the triangle attached to the underside of the liferaft;
The design shall be such that the pockets fill to approximately 60% of capacity within 15–25 seconds of deployment;
The pockets shall normally have aggregate capacity of between 125 litres and 150 litres for inflatable liferafts up to and including the 10 person size;
The pockets to be fitted on liferafts certified to carry more than 10 persons shall have as far as practicable an aggregate capacity of (12 × N) litres, where N = Number of persons carried;
The pockets shall be attached on all their sides to each of the upper and lower surfaces of the buoyancy tubes; and
The pockets shall be distributed symmetrically round the circumference of the liferaft with sufficient separation between each pocket to enable air to escape readily.