Schedule 2 PROVISIONS TO BE INSERTED AFTER THE TABLE IN SCHEDULE 1 TO THE PRINCIPAL REGULATIONS

“PART II

LOW VOLUME TYPE APPROVAL VEHICLES

INTERIOR FITTINGS

1

The vehicle must comply with the design and construction requirements specified in—

(a)

Annex I, paragraph 5 (excluding sub-paragraphs 5.1.2, 5.2.4, 5.3.4.1, 5.4.2.2, 5.7.1.2 and with the omission of the second sentence in 5.2.3.1) of Council Directive 74/60/EEC of 17th December 1973^f1 as corrected on 6th August 1974^f2 and 25th February 1977^f3 and amended by Commission Directive 78/632/EEC of 19th May 1978^f4; or

(b)

paragraph 5 (excluding sub-paragraphs 5.1.2, 5.2.3.1, 5.2.4, 5.3.4.1, 5.4.2.2, 5.4.2.3, and 5.7.1.2) of ECE Regulation 21 as revised on 8th October 1980, amended on 26th April 1986 and corrected on 10th October 1986.

2

The vehicle must also be constructed so that the metal wires which stretch the lining of the roof and the frames of the sun visors have a maximum diameter of 5mm.”