Regulation 21 Amendments to the Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations 1999

For Table D in Part II of Schedule 3, there shall be substituted the following provisions—

“

TABLE D

Column 1 Column 2 Column 3 Column 4
Item Parameters Units of Measurement Maximum Concentration

Note 1: The maximum concentration specified applies to the sum of the concentrations of the specified parameters.

Note 2: The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.

1. Boron mg B/l 1.0
2. Benzo (a) pyrene μg/l 0.010
3. Tetrachloroethene and Trichloroethene μg/l 10 (note 1)
4. Tetrachloromethane μg/l 3
5. Benzene μg/l 1.0
6. 1,2-dichloroethane μg/l 3.0
7. Trichloromethane, Dichlorobromomethane, Dibromochloromethane and Tribromomethane μg/l 100 (note 1)
8. Epichlorohydrin μg/l 0.10 (note 2)
9. Vinyl chloride μg/l 0.50 (note 2)
10. Acrylamide μg/l 0.10 (note 2)

”.

Column 1	Column 2	Column 3	Column 4
Item	Parameters	Units of Measurement	Maximum Concentration
Note 1: The maximum concentration specified applies to the sum of the concentrations of the specified parameters. Note 2: The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water.
1.	Boron	mg B/l	1.0
2.	Benzo (a) pyrene	μg/l	0.010
3.	Tetrachloroethene and Trichloroethene	μg/l	10 (note 1)
4.	Tetrachloromethane	μg/l	3
5.	Benzene	μg/l	1.0
6.	1,2-dichloroethane	μg/l	3.0
7.	Trichloromethane, Dichlorobromomethane, Dibromochloromethane and Tribromomethane	μg/l	100 (note 1)
8.	Epichlorohydrin	μg/l	0.10 (note 2)
9.	Vinyl chloride	μg/l	0.50 (note 2)
10.	Acrylamide	μg/l	0.10 (note 2)