F1
Manufacturers or their authorised representatives in the Union shall determine the environmental correction K2A in accordance with EN ISO 3744:2010, Section 4.3.
If K2A ≤ 0,5 dB, it can be neglected.
If K2A > 4 dB, the test environment does not comply with the requirements of this Directive and shall be modified.
Manufacturers or their authorised representatives in the Union shall use the specifications for the environmental correction laid down in the noise test code for specific equipment referred to in Part B of this Annex where such specifications exist.
Annotations
Textual amendments
- F1
Sch. 6 substituted (N.I.) (22.5.2025) by The Noise Emission in the Environment by Equipment for use Outdoors (Amendment) (Northern Ireland) Regulations 2025 (S.I. 2025/407), reg. 1(2), Sch. (with reg. 3)
Notes on the whole SI
Textual amendments
- F1
- F2
Notes on Schedule 6
Extent
- E1
This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only