Paragraph 3 E1
England, Wales and Scotland
The technical documentation must enable the conformity of the equipment with the requirements of F1these Regulations to be assessed. It must contain at least the following information:
— name and address of the manufacturer or his authorised representative F2...
— a description of the equipment
— make
— trade name
— type, series and numbers
— the technical data relevant for the identification of the equipment and the assessment of its noise emission, including, if appropriate, schematic drawings and any description and explanation necessary for their understanding
— the reference to these Regulations
— the technical report of noise measurements carried out in accordance with the provisions of these Regulations
— the technical instruments applied and the results of the evaluation of the uncertainties due to production variation and their relation to the guaranteed sound power level.
Annotations
Textual amendments
- F1
Words in Sch. 9 para. 3 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 22(c)(i) (with Sch. 8 para. 14) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
- F2
Words in Sch. 9 para. 3 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 8 para. 22(c)(ii) (with Sch. 8 para. 14) (as amended by S.I. 2019/1246, regs. 1(3), 10(c)(iii) and S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Extent
- E1
This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Notes on the whole SI
Textual amendments
- F1
- F2