OpenLegislation

Non-automatic Weighing Instruments (Use for Trade) Regulations (Northern Ireland) 2001

S.R. 2001/202 · Made 10 May 2001 · Extends to Northern Ireland

Up to date with all changes known to legislation.gov.uk, revised to 15 June 2001.

WEIGHTS AND MEASURES

Made 10th May 2001

Coming into operation 15th June 2001

The Department of Enterprise, Trade and Investment, in exercise of the powers conferred by Article 13(1) of the Weights and Measures (Northern Ireland) Order 1981f1 and now vested in itf2 and of every other power enabling it in that behalf, hereby makes the following Regulations:—

Annotations to the whole text

Footnotes

f1

S.I. 1981/231 (N.I. 10)

f2

By S.I. 1982/846 N.I. 11) Art. 4; see also S.I. 1999/283 (N.I. 1) Art. 3(5)

Contents

  1. 1Citation, commencement and revocation
  2. 2Interpretation
  3. 3Application
  4. 4Restrictions on use of instruments for trade
  5. 5Manner of erection of instruments
  6. 6Instruments marked with temperature range
  7. 7Instruments marked with manner of use
  8. 8Instruments fitted with printing devices
  9. 9Load receptors
  10. 10Operation of instrument
  11. 11Weights marked with EEC initial verification marks to be used
  12. 12Instruments using decimal parts of a pound
  13. 13Instruments to be balanced or to be set to zero before use
  14. Signature
  15. Schedule Schedule
  16. Explanatory note

1Citation, commencement and revocationI1

(1)

These Regulations may be cited as the Non-automatic Weighing Instruments (Use for Trade) Regulations (Northern Ireland) 2001 and shall come into operation on 15th June 2001.

(2)

The Regulations set out in the Schedule are hereby revoked to the extent shown in column 3 thereof.

2InterpretationI1

(1)

In these Regulations—

  • “the 1981 Order” means the Weights and Measures (Northern Ireland) Order 1981;

  • “the 2000 Regulations” means the Non-automatic Weighing Instruments Regulations 2000f1;

  • “approved body” means—

    1. (a)

      a body which is designated by the Secretary of State under regulation 9(1) of the 2000 Regulations for the purpose of carrying out one or more tasks referred to in Article 8 of the Directive; or

    2. (b)

      a body which is designated for that purpose by another member State,

    and whose name is notified to the Commission and the member States under Article 9 of the Directive;

  • “approved type” means a type in respect of which an EC type-approval certificate is in force;

  • “the Directive” means Council Directive 90/384/EEC of 20th June 1990 on the harmonisation of the laws of the member States relating to non-automatic weighing instrumentsf2 as amended by Council Directive 93/68/EECf3;

  • “EC type-approval certificate” means a certificate issued by the Secretary of State under regulation 10 of the 2000 Regulations or by an approved body designated by another member State, as the case may be;

  • “instrument” means a non-automatic weighing instrument (including ancillary equipment) which—

    1. (i)

      requires the intervention of an operator during weighing, and

    2. (ii)

      serves to determine the mass or weight of any thing by using the action of gravity on that thing (whether or not it may also determine related matters such as price, quantity or magnitude on the basis of mass or weight); and

  • “load receptor” means a part of an instrument on which loads are placed for the purpose of their being weighed.

(2)

In these Regulations, references to instruments of a numbered Class shall be construed in accordance with paragraph 2 of Annex 1 of the Directive which is set out in Schedule 2 to the 2000 Regulations.

3ApplicationI1

These Regulations apply to any instrument, in use for trade, to which regulation 3 of the 2000 Regulationsf1 applies.

4Restrictions on use of instruments for tradeI1

(1)

Save in accordance with paragraph (2), a person shall not use for trade an instrument marked with a weighing range for determining a weight outside that range in relation—

(a)

to, or to articles made from, gold, silver or other precious metals, including gold or silver thread or fringe;

(b)

to precious stones or pearls; or

(c)

to drugs or other pharmaceutical products.

(2)

An instrument marked with a weighing range may be used for trade for determining the weight of any item by ascertaining the difference between two weights (both of which fall within the weighing range), that is to say, the weight of that item and another item or items and the weight of that other or those other items only.

(3)

A person shall not use for trade any instrument other than an instrument of accuracy classification as Class I or Class II in any transaction—

(a)

in, or in articles made from, gold, silver or other precious metals, including gold or silver thread or fringe;

(b)

in precious stones or pearls.

(4)

A person shall not use for trade an instrument carrying a marking in accordance with the EC type-approval certificate, or to which the restrictive use symbol referred to in paragraph 3 of Annex IV of the Directive applies, for a purpose which does not accord with the marking or the symbol.

(5)

A person shall not use a Class IIII instrument for trade for any purpose other than for weighing—

(a)

any of the materials to which the expression “ballast” applies in Schedule 4 to the 1981 Order;

(b)

any material the disposal of which constitutes a landfill disposal as defined in subsection (2) of section 70 of the Finance Act 1996f1, whether or not the disposal amounts to a taxable disposal as defined in section 40 of that Act; or

(c)

commercial, household or industrial waste.

(6)

A person shall not use for trade any instrument for the purpose of multiple weighing, that is to say, determining the mass of a load by totalling the results of more than one static weighing operation during each of which the load is only partially supported by the load receptor.

(7)

For the purposes of this regulation, the terms “commercial waste”, “household waste” and “industrial waste” shall be construed in accordance with paragraph (2) of Article 2 of the Waste and Contaminated Land (Northern Ireland) Order 1997f2, provided that “waste” shall include any waste disposed of for reprocessing or recycling purposes, but shall not include any radioactive waste as defined in section 2 of the Radioactive Substances Act 1993f3.

5Manner of erection of instrumentsI1

Where an instrument is fitted with one or more level-indicating devices, a person shall not use the instrument for trade unless each such device indicates that it has been set to its reference position.

6Instruments marked with temperature rangeI1

Where an instrument is marked with a temperature range, a person shall not use the instrument for trade at temperatures outside that range.

7Instruments marked with manner of useI1

Where an instrument is marked with the manner of use, a person shall not use the instrument for trade in a manner which does not accord with the marking.

8Instruments fitted with printing devicesI1

Where an instrument is fitted with a weight or any other printing device, a person shall not use the instrument for trade unless it is so erected and used that the printing device, when used, produces a legible and durable printout.

9Load receptorsI1

(1)

A person shall not use any instrument for trade unless it is erected and used in such a manner that, during a weighing operation, the load being weighed is stationary relative to the load receptor and supported only by the load receptor.

(2)

A person shall not use for trade an instrument for the purpose of sales by retail—

(a)

unless—

(i)

the load receptor is not less than 10 millimetres above any adjacent surface; or

(ii)

where the load receptor is less than 10 millimetres above any adjacent surface, the boundary of the top surface of all adjacent surfaces is durably marked in a distinctive and contrasting manner with a band at least 15 millimetres in width; or

(b)

if the load receptor is below the level of any adjacent surface.

10Operation of instrumentI1

Except as specified in the EC type-approval certificate, a person shall not use an instrument for trade unless it is erected in such a manner that the operator can, notwithstanding the nature of the instrument or its surroundings, readily take up a single position from which he can—

(a)

see directly or with the aid of mirrors, closed-circuit television or other permanently installed facilities, the whole of the unladen load receptor;

(b)

operate the instrument’s controls; and

(c)

obtain a weight reading from the instrument.

11Weights marked with EEC initial verification marks to be usedI1

(1)

Subject to paragraph (2), a person shall not use for trade a Class I or Class II instrument which is used in association with any weight or weights to determine the value of any load in terms of metric units of mass other than carat (metric) units, save in association with weights which bear the mark of EEC initial verification in accordance with—

(a)

the provisions of—

(i)

in the case of Class II instruments, Council Directive No. 74/148/EEC on above-medium accuracy weightsf1, or

(ii)

in the case of Class I instruments, the said Directive, except for those provisions relating to weights of Class F2 or Class M1, and

(b)

the provisions of paragraph 5 of Schedule 1 to the Measuring Instruments (EEC Requirements) Regulations 1988f2.

(2)

The requirements of this regulation shall not apply to any instrument for use for trade in any transaction in drugs or other pharmaceutical products before 1st January 2003.

12Instruments using decimal parts of a poundI1

A person shall not use for trade an instrument having weight scale intervals expressed in decimal parts of a pound, save by way only of a supplementary indication of the weight of the goods.

13Instruments to be balanced or to be set to zero before useI1

(1)

Subject to paragraph (2), a person shall not use an instrument for trade unless it is properly balanced or set to zero immediately prior to use.

(2)

Paragraph (1) shall not apply in the case of an instrument of an approved type if, in the EC type-approval certificate, it is described as not being so constructed as to balance when unloaded.

Signature

Sealed with the Official Seal of the Department of Enterprise, Trade and Investment on 10th May 2001.

L.S.

M. Bohill

A senior officer of the

Department of Enterprise, Trade and Investment

I1

RegulationsReferenceExtent of revocation
The Non-automatic Weighing Instruments (EEC Requirements) (Use for Trade) Regulations (Northern Ireland) 1992S.R. 1992 No. 484The whole Regulations
The Non-automatic Weighing Machines and Non-automatic Weighing Instruments (Amendment) Regulations (Northern Ireland) 1996S.R. 1996 No. 320Regulations 7 to 10

Explanatory note

(This note is not part of the Regulations.)

These Regulations revoke and replace the Non-automatic Weighing Instruments (EEC Requirements) (Use for Trade) Regulations (Northern Ireland) 1992 as amended (“the 1992 Regulations”). In addition to minor and drafting amendments, the Regulations allow a Class IIII instrument to be used for trade for the purposes of weighing any material the disposal of which constitutes a landfill disposal and any commercial, household or industrial waste (regulation 4(5)).

In other respects these Regulations re-enact the 1992 Regulations.

The Regulations have been notified to the European Commission in draft pursuant to Directive 98/34/EC (O.J. No. L204, 21.7.1998, p. 37) as amended by Directive 98/48/EC (O.J. No. L217, 5.8.1998, p. 18) which lays down a procedure for the provision of information in the field of technical standards and regulations.