OpenLegislation

Regulation 6 Provisions for grant of type approval certificate

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

(1)

After the coming into force of these Regulations, the approval authority shall not issue a type approval certificate under regulation 9(1) for an engine type or engine family, nor any other type approval for non-road mobile machinery in which an engine is installed, where the engine has a power output falling within Category A, Category B or Category C, if the engine does not meet the requirements specified in these Regulations and if the emissions of gaseous and particulate pollutants from the engine do not comply with the limit values set out in the table in paragraph 4.2.1 of Schedule 1.

(2)

After the date specified in the second column of the table in this regulation, the approval authority shall not grant a type approval certificate under regulation 9(1) for an engine type or engine family, nor any other type approval for non-road mobile machinery in which an engine is installed, in respect of an engine within the category set out in the first column of the table if the engine does not meet the requirements specified in these Regulations and if the emissions of gaseous and particulate pollutants from the engine do not comply with the limit values set out in the table in paragraph 4.2.3 of Schedule 1:

CategoryDate
Category D31 December 1999
Category E31 December 2000
Category F31 December 2001
Category G31 December 2002.