OpenLegislation

The Non-Road Mobile Machinery (Emission of Gaseous and Particulate Pollutants) Regulations 1999

S.I. 1999/1053 · Made 28 March 1999

Original text. legislation.gov.uk does not revise statutory instruments, so later amendments are not shown here. Changes made to it are listed under each provision when known.

ENVIRONMENTAL PROTECTION

Made 28th March 1999

Laid before Parliament 31st March 1999

Coming into force 26th April 1999

The Secretary of State, being a Minister designatedf1 for the purposes of section 2(2) of the European Communities Act 1972f2 in relation to measures relating to the reduction of emissions of pollutants from internal combustion engines, in exercise of the powers conferred on him by that section, and of all other powers enabling him in that behalf, hereby makes the following Regulations:

Annotations to the whole text

Footnotes

f1

S.I. 1998/745.

f2

1972 c. 68.

Contents

  1. Part I
  2. 1Citation and commencement
  3. 2Interpretation
  4. Part II
  5. 3Scope and Exclusions
  6. 4General duty relating to placing on the market
  7. 5Categories of engines
  8. 6Provisions for grant of type approval certificate
  9. 7Transitional provisions in respect of placing on the market
  10. 8Application for type approval
  11. 9Approval of engines
  12. 10Amendments to approvals
  13. 11Conformity
  14. 12Provision of Technical Service
  15. 13Non-conformity with the approved type or family
  16. 14Fees
  17. 15Exemptions and alternative procedures
  18. Part III
  19. 16Enforcement Authorities
  20. 17Offences
  21. 18Penalty
  22. 19Defence of due diligence
  23. 20Liability of persons other than the principal offender
  24. Signature
  25. Schedule 1: (Annex 1 to Directive 97/68/EC)
  26. 1Paragraph 1
  27. 2DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  28. 2.1DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  29. 2.2DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  30. 2.3DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  31. 2.4DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  32. 2.5DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  33. 2.6DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  34. 2.7DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  35. 2.8DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  36. 2.9DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  37. 2.9.1DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  38. 2.9.2DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  39. 2.9.3DEFINITIONS, SYMBOLS AND ABBREVIATIONS
  40. 3ENGINE MARKINGS Repealed
  41. 3.1ENGINE MARKINGS
  42. 3.1.1ENGINE MARKINGS
  43. 3.1.2ENGINE MARKINGS
  44. 3.1.3ENGINE MARKINGS
  45. 3.2ENGINE MARKINGS
  46. 3.3ENGINE MARKINGS
  47. 3.3.1ENGINE MARKINGS
  48. 3.3.2ENGINE MARKINGS
  49. 3.4ENGINE MARKINGS
  50. 3.5ENGINE MARKINGS
  51. 3.6ENGINE MARKINGS
  52. 4SPECIFICATIONS AND TESTS Repealed
  53. 4.1General
  54. 4.2Specifications concerning the emissions of pollutants
  55. 4.2.1Specifications concerning the emissions of pollutants
  56. 4.2.2Specifications concerning the emissions of pollutants
  57. 4.2.3Specifications concerning the emissions of pollutants
  58. 4.2.4Specifications concerning the emissions of pollutants
  59. 4.3Installation on the mobile machinery
  60. 4.3.1Installation on the mobile machinery
  61. 4.3.2Installation on the mobile machinery
  62. 5SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS Repealed
  63. 5.1SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  64. 5.2SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  65. 5.2.1SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  66. 5.2.2SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  67. 5.2.3SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  68. 5.2.4SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  69. 5.2.5SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  70. 5.3SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  71. 5.3.1SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  72. 5.3.2SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  73. 5.3.2.1SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  74. 5.3.2.2SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  75. 5.3.3SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  76. 5.3.4SPECIFICATION OF CONFORMITY OF PRODUCTION ASSESSMENTS
  77. 6PARAMETERS DEFINING THE ENGINE FAMILY
  78. 6.1PARAMETERS DEFINING THE ENGINE FAMILY
  79. 6.2PARAMETERS DEFINING THE ENGINE FAMILY
  80. 6.3PARAMETERS DEFINING THE ENGINE FAMILY
  81. 6.4PARAMETERS DEFINING THE ENGINE FAMILY
  82. 6.5PARAMETERS DEFINING THE ENGINE FAMILY
  83. 6.6PARAMETERS DEFINING THE ENGINE FAMILY
  84. 6.7PARAMETERS DEFINING THE ENGINE FAMILY
  85. 6.8PARAMETERS DEFINING THE ENGINE FAMILY
  86. 6.9PARAMETERS DEFINING THE ENGINE FAMILY
  87. 7PARAMETERS DEFINING THE ENGINE FAMILY
  88. 7.1PARAMETERS DEFINING THE ENGINE FAMILY
  89. 7.2PARAMETERS DEFINING THE ENGINE FAMILY
  90. Schedule 2(Annex II to Directive 97/68/EC)
  91. Schedule 3: (Annex III to Directive 97/68/EC)
  92. 1Paragraph 1
  93. 1.1Paragraph 1.1
  94. 1.2Paragraph 1.2
  95. 2Paragraph 2
  96. 2.1General Requirements
  97. 2.2General Requirements
  98. 2.2.1General Requirements
  99. 2.2.2Test validity
  100. 2.2.3Engines with charge air cooling
  101. 2.3Engine air inlet system
  102. 2.4Engine exhaust system
  103. 2.5Cooling system
  104. 2.6Lubricating oil
  105. 2.7Test fuel
  106. 2.8Determination of dynamometer settings
  107. 3Determination of dynamometer settings
  108. 3.1Preparation of the sampling filters
  109. 3.2Installation of the measuring equipment
  110. 3.3Starting the dilution system and engine
  111. 3.4Adjustment of the dilution ratio
  112. 3.5Checking the analysers
  113. 3.6Checking the analysers
  114. 3.6.1Checking the analysers
  115. 3.6.1.1Checking the analysers
  116. 3.6.2Conditioning of the Engine
  117. 3.6.3Test sequence
  118. 3.6.4Analyser response
  119. 3.6.5Particulate sampling
  120. 3.6.6Engine conditions
  121. 3.7Re-checking the analysers
  122. 1Appendix 1
  123. 2Appendix 2
  124. 3Appendix 3
  125. Schedule 4(Annex IV to Directive 97/68/EC)
  126. Schedule 5(ANNEX V to Directive 97/68/EC)
  127. 1.1Determination of the gaseous emissions
  128. 1.1.1Gaseous exhaust components CO, CO2, HC, NOX
  129. Figure 2Flow diagram of exhaust gas analysis system for CO, CO2 and HC
  130. Figure 3Flow diagram of dilute exhaust gas analysis system for CO, CO2, NOX and HC
  131. 1.2Determination of the particulates
  132. 1.2.1Determination of the particulates
  133. 1.2.1.1Partial flow system (Figures 4 to 12)
  134. Figure 4Partial flow dilution system with isokinetic probe and fractional sampling (SB control)
  135. Figure 5Partial flow dilution system with isokinetic probe and fractional sampling (PB control)
  136. Figure 6Partial flow dilution system with CO2 or NOX concentration measurement and fractional sampling
  137. Figure 7Partial flow dilution system with CO2 concentration measurement, carbon balance and total sampling
  138. Figure 8Partial flow dilution system with single venturi, concentration measurement and fractional sampling
  139. Figure 9Partial flow dilution system twin venturi or twin orifice, concentration measurement and fractional sampling
  140. Figure 10Partial flow dilution system with multiple tube splitting, concentration measurement and fractional sampling
  141. Figure 11Partial flow dilution system with flow control and total sampling
  142. Figure 12Partial flow dilution system with flow control and fractional sampling
  143. 1.2.1.2Full flow dilution system (Figure 13)
  144. Figure 13Full flow dilution system
  145. 1.2.2Particulate sampling system (Figures 14 and 15)
  146. Figure 14Particulate sampling system
  147. Figure 15Dilution system (full flow system only)
  148. Schedule 6Schedule 6
  149. Schedule 7: (ANNEX VII to Directive 97/68/EC)
  150. 1Paragraph 1
  151. 2Paragraph 2
  152. 3Paragraph 3
  153. Explanatory note