OpenLegislation

Paragraph 1

Original text. Later amendments are not shown.

The number shall consist of five sections separated by the (*) character.

  • Section 1: the lower case letter ‘e’ followed by the distinguishing letter(s) or number of the Member State issuing the approval:

    1for Germany
    2for France
    3for Italy
    4for the Netherlands
    5for Sweden
    6for Belgium
    9for Spain
    11for the United Kingdom
    12for Austria
    13for Luxembourg
    17for Finland
    18for Denmark
    21for Portugal
    23for Greece
    IRLfor Ireland
  • Section 2: the number of this Directive. As it contains different implementation dates and different technical standards, two alphabetical characters are added. These characters refer to the different application dates for the stages of severity and to the application of the engine for different specification of mobile machinery, on the basis of which type-approval was granted. The first character is defined in Article 9. The second character is defined in Annex I, section 1 with regard to the test mode defined in Annex III, section 3.6.

  • Section 3: the number of the latest amending Directive applicable to the approval. If applicable two further alphabetical characters are to be added depending on the conditions described in section 2, even if as a result of the new parameters only one of the characters was to be changed. If no change of these characters apply they shall be omitted.

  • Section 4: a four-digit sequential number (with leading zeros as applicable) to denote the base approval number. The sequence shall start from 0001.

  • Section 5: a two-digit sequential number (with a leading zero if applicable) to denote the extension. The sequence shall start from 01 for each base approval number.