OpenLegislation

The Pottery (Health etc.) (Metrication) Regulations 1982

S.I. 1982/877 · Made 25 June 1982

Original text. legislation.gov.uk does not revise statutory instruments, so later amendments are not shown here. Changes made to it are listed under each provision when known.

HEALTH AND SAFETY

Made 25th June 1982

Laid before Parliament 9th July 1982

Coming into Operation 1st October 1982

The Secretary of State, in exercise of the powers conferred on him by sections 49(1), (2) and (4) and 82(3)(a) of the Health and Safety at Work etc. Act 1974f1 (“the 1974 Act”) and of all other powers enabling him in that behalf and for the purpose of giving effect without modification to proposals submitted to him by the Health and Safety Commission under section 11(2)(d) of the 1974 Act after the carrying out by the said Commission of consultations in accordance with section 50(3) of that Act, hereby makes the following Regulations:—

Annotations to the whole text

Footnotes

f1

section 49 was amended by the Employment Protection Act 1975 (c.71), section 116 and Schedule 15, paragraph 15.

Contents

  1. 1Citation, commencement and interpretation
  2. 2Amendments to the principal Regulations to substitute metric measurements for imperial and other measurements
  3. 3Amendments to the Abstract of Special Regulations (Pottery—Health and Welfare) Order 1973
  4. 4Application to existing premises and plant or premises and plant under construction
  5. Signature
  6. Schedule THEAMENDMENTS TO REGULATIONS
  7. Explanatory note

1Citation, commencement and interpretation

(1)

These Regulations may be cited as The Pottery (Health etc.) (Metrication) Regulations 1982 and shall come into operation on 1st October 1982.

(2)

In these Regulations, unless the context otherwise requires, “the principal Regulations” mean the Regulations which are amended by Regulation 2 of these Regulations, that is to say:—

  • The Pottery (Health) Special Regulations 1947;

  • The Pottery (Health and Welfare) Special Regulations 1950f1.

2Amendments to the principal Regulations to substitute metric measurements for imperial and other measurements

The provisions of the principal Regulations specified in the Schedule to these Regulations in column 1 shall be amended by substituting for the measurements set out opposite thereto in column 3 the measurements set out in the corresponding entry in column 4.

3Amendments to the Abstract of Special Regulations (Pottery—Health and Welfare) Order 1973

In Schedules 1 and 2 of the Abstract of Special Regulations (Pottery—Health and Welfare) Order 1973, which reproduce parts of the Pottery (Health and Welfare) Special Regulations 1950, there shall be substituted for the measurements set out in the relevant entries in the Schedule to these Regulations in column 3 the measurements set out opposite thereto in column 4.

4Application to existing premises and plant or premises and plant under construction

Where any premises or plant in existence or under construction immediately before the coming into operation of these Regulations complied with the requirements of the principal Regulations as then in force, those premises or that plant shall be deemed to comply with the principal Regulations as amended by these Regulations.

Signature

Signed by order of the Secretary of State.

David Waddington

Joint Parliamentary Under Secretary of State

Department of Employment

25th June 1982

Schedule THEAMENDMENTS TO REGULATIONS

1234
Regulation to be amendedSubject matter of measurementPresent measurementMeasurement to be substituted
The Pottery (Health) Special Regulations 1947
Regulation 2Definition of “low solubility glaze”: temperature at which a weighed quantity of the material has been dried100 degrees Centigrade100 degrees Celsius
The Pottery (Health and Welfare) Special Regulations 1950
Regulation 2(2)Definition of “low solubility glaze”: temperature at which a weighed quantity of the material has been dried100 degrees Centigrade100 degrees Celsius
Regulation 6(2)(a)(i)(a) Maximum distance a woman or young person may carry clay, clay dust or clay scraps50 yards45 metres
(b) Maximum weight a woman or young person may carry40 lbs18 kilograms
Regulation 6(2)(a)(ii)(a) Maximum distance a woman or young person may carry damp clay50 yards45 metres
(b) Maximum weight a woman or young person may carry40 lbs18 kilograms
Regulation 6(6)(a)Maximum weight a woman may lift or carry by herself30 lbs13 kilograms
Regulation 6(6)(b)Maximum weight a woman may lift or carry in conjunction with any other person50 lbs22 kilograms
Regulation 6(6)(c)Maximum height above floor level saggars may be lifted by a womanFour feet six inches1.35 metres
Regulation 6(6) (Proviso)Proviso which relates to carrying short distances—
(a) Maximum weight a woman may lift or carry by herself50 lbs22 kilograms
(b) Maximum weight a woman may lift or carry in conjunction with any other person80 lbs36 kilograms
(c) For the purposes of the proviso, the maximum distance a woman may carry a saggarSix feet1.8 metres
Regulation 6(7)Maximum weight a young person may lift or carry20 lbs9 kilograms
Regulation 12(2)(c)Maximum intervals above trough at which warm water to be suppliedTwo feet600 millimetres
Regulation 12(3)(a)(a) Definition of “unit” in terms of length of troughTwo feet600 millimetres
(b) Definition of “unit” in terms of section of circumference of troughTwo feet600 millimetres
Regulation 12(3)(d)Minimum internal measurement of basin or other receptacleFour feet1.2 metres
Regulation 16(1)(a) Maximum temperature of workroom75 degrees Fahrenheit24 degrees Celsius
(b) Minimum outside temperature above which proviso applies65 degrees Fahrenheit18 degrees Celsius
(c) Maximum temperature of workroom75 degrees Fahrenheit24 degrees Celsius
(d) Maximum interval by which workroom temperature may exceed outside temperature10 degrees6 degrees
Regulation 16(2)Minimum workroom temperature55 degrees Fahrenheit13 degrees Celsius
Regulation 16(4)Maximum temperature in oven115 degrees Fahrenheit46 degrees Celsius
Regulation 17(1)(xix)Exception to use of efficient exhaust draught in lawning of dry colours: maximum amount lawned at a timeOne ounce25 grams
Regulation 22(b)(i)Minimum floor area to each tile pressSeventy square feet6.5 square metres
Regulation 22(b)(ii)Minimum distance between the centres of the dies of any two pressesFive feet six inches1.7 metres
Regulation 22(b)(iii)Minimum width of certain gangwaysSix feet1.8 metres
Regulation 22(c)(i)Minimum floor area to each tile pressOne hundred and twenty square feet11 square metres
Regulation 22(c)(ii)Minimum distance between the centres of the dies of any two pressesNine feet2.8 metres
Regulation 22(c)(iii)Minimum width of certain gangwaysSeven feet six inches2.3 metres
Regulation 22(c) (Proviso)(a) Minimum distance between the centres of the dies of pressesSix feet six inches2 metres
(b) Minimum width of certain gangwaysSix feet1.8 metres
Regulation 24(3)(a)Minimum distance of painting from end of boardSix inches150 millimetres
Regulation 29(1)(a)Height above which cleaning shall be done once every 14 monthsSeven feet six inches2.3 metres
Regulation 29(1)(b)Height up to which cleaning shall be done as requiredSeven feet six inches2.3 metres

Explanatory note

These Regulations amend—

  • The Pottery (Health) Special Regulations 1947; and

  • The Pottery (Health and Welfare) Special Regulations 1950;

by substituting amounts or quantities expressed in metric units for amounts or quantities not so expressed or expressed in metric units of a different description and, by Regulation 3, the Abstract of Special Regulations (Pottery—Health and Welfare) Order 1973 is similarly amended.

Regulation 4 provides that the amendments do not relate to premises or plant in existence or under construction immediately before the coming into operation of these Regulations if those premises or that plant complied with the then existing Regulations.