Paragraph 50 F1

Where necessary to ensure valid results, the organisation must have procedures to ensure that its measuring equipment is—

(a)

calibrated or verified at specified intervals, or prior to use, against international, national or industrial measurement standards; where no such standards exist, the basis used for calibration or verification must be recorded;

(b)

adjusted or re-adjusted as necessary;

(c)

identified to enable the calibration status to be determined;

(d)

safeguarded from adjustments that would invalidate the measurement result;

(e)

protected from damage and deterioration during handling, maintenance and storage.

Annotations

Textual amendments

F1: Schs. 8-11 inserted (31.12.2020) by The Rail Safety (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/837), reg. 1, Sch. para. 1 (as amended in Sch. 11 paras. 14, 16, 17 by S.I. 2019/1310, reg. 1(2)(c), Sch. 1 paras. 2, 3, 4); 2020 c. 1, Sch. 5 para. 1(1)

Notes on Schedule 10

Marginal citations

M1: Annexes IV and V of Commission Regulation (EU) No 445/2011 are substantially reproduced in Schedule 9.