OpenLegislation

Regulation 12 Compliance procedures for series productionI1E1

England, Wales and Scotland

(1)

The manufacturer of a product which is manufactured by series production must ensure that, before placing the product on the market, procedures are in place to ensure that any product so manufactured will be in conformity with the manufacturer’s obligations under Part 2.

(2)

In doing so, the manufacturer must take adequate account of—

(a)

any changes in the design or characteristics of a product; and

(b)

any changes in the F1designated standard or in another technical specification by reference to which the F2... declaration of conformity of the product was drawn up.

Annotations

Textual amendments

F1

Word in reg. 12(2)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 8(a) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2

Word in reg. 12(2)(b) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 8(b) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement

I1

Reg. 12 in force at 3.8.2017, see reg. 1

Extent

E1

This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only