OpenLegislation

Regulation 47 Noise emissions: personal watercraftI1E1

England, Wales and Scotland

(1)

The personal watercraft or engine manufacturer must apply the relevant procedure in paragraphs (2) or (3) as set out in F1Schedule 15, with regard to noise emissions for—

(a)

personal watercraft and outboard propulsion engines; and

(b)

stern drive propulsion engines with integral exhausts intended for installation on recreational craft.

(2)

Where the tests are conducted using the F2designated standard for noise measurement, any of the following modules apply—

(a)

Module A1 (internal production control plus supervised product testing);

(b)

Module G (conformity based on unit verification);

(c)

Module H (conformity based on full quality assurance).

(3)

Where the tests are conducted without using the F3designated standard for noise measurement, Module G (conformity based on unit verification) applies.

Annotations

Textual amendments

F1

Words in reg. 47(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 29(a) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2

Word in reg. 47(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 29(b) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3

Word in reg. 47(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 29(b) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement

I1

Reg. 47 in force at 3.8.2017, see reg. 1

Extent

E1

This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only