OpenLegislation

Regulation 52 Conformity assessments carried out under Module C (conformity to type based on internal production control)I1E1

England, Wales and Scotland

(1)

This regulation applies where—

(a)

an economic operator has a conformity assessment carried out on a watercraft under Module C (conformity to type based on internal production control) F1set out in Schedule 15;

(b)

Module C is used to assess the conformity of the product with the exhaust emission requirements of these Regulations; and

(c)

the manufacturer is not working under a relevant quality system as described in Module H F2set out in Schedule 15.

(2)

F3An approved body chosen by the manufacturer must carry out product checks as required by Module C or have them carried out at random intervals to be determined by F4the approved body, in order to verify the quality of the internal checks on the product carried out under the manufacturer’s own checking measures.

(3)

When the quality level appears unsatisfactory or when it seems necessary to verify the validity of the data presented by the manufacturer, the procedure set out in Schedule 8 applies.

Annotations

Textual amendments

F1

Words in reg. 52(1)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 33(a)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2

Words in reg. 52(1)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 33(a)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3

Words in reg. 52(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 33(b)(i) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F4

Words in reg. 52(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 28 para. 33(b)(ii) (with Sch. 28 para. 41) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement

I1

Reg. 52 in force at 3.8.2017, see reg. 1

Extent

E1

This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only