Section 11ZA Grounds for invalidity of registration.F1
United Kingdom
The registration of a design may be declared invalid —
on the ground that it does not fulfil the requirements of section 1(2) of this Act;
on the ground that it does not fulfil the requirements of sections 1B to 1D of this Act; or
where any ground of refusal mentioned in Schedule A1 to this Act applies.
The registration of a design (“the later design”) may be declared invalid if it is not new or does not have individual character when compared to a design which—
has been made available to the public on or after the relevant date; but
In subsection (1A) “the relevant date” means the date on which the application for the registration of the later design was made or is treated by virtue of section 3B(2), (3) or (5) or 14(2) of this Act as having been made.
The registration of a design may be declared invalid on the ground of the registered proprietor not being the proprietor of the design and the proprietor of the design objecting.
The registration of a design involving the use of an earlier distinctive sign may be declared invalid on the ground of an objection by the holder of rights to the sign which include the right to prohibit in the United Kingdom such use of the sign.
The registration of a design constituting an unauthorised use of a work protected by the law of copyright in the United Kingdom may be declared invalid on the ground of an objection by the owner of the copyright.
In this section and sections 11ZB, 11ZC and 11ZE of this Act (other than section 11ZE(1)) references to the registration of a design include references to the former registration of a design; and these sections shall apply, with necessary modifications, in relation to such former registrations.
Annotations
Textual amendments
- F1
Ss. 11-11ZF substituted (9.12.2001) for s. 11 by S.I. 2001/3949, reg. 7 (with transitional provisions in regs. 10-14)
- F2
Words in s. 11ZA(1) substituted (1.10.2006) by Regulatory Reform (Registered Designs) Order 2006 (S.I. 2006/1974), arts. 1(1), 7(2) (with art. 18)
- F3
S. 11ZA(1A)(1B) inserted (1.10.2006) by Regulatory Reform (Registered Designs) Order 2006 (S.I. 2006/1974), arts. 1(1), 7(3) (with art. 18)
- F4
S. 11ZA(1A)(b) substituted (1.1.2008) by Designs (International Registrations Designating the European Community) Regulations 2007 (S.I. 2007/3378), regs. 1, 2
- F5
Words in s. 11ZA(1A)(b) substituted (31.12.2020) by virtue of The Designs and International Trade Marks (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/638), reg. 1, Sch. 8 para. 3; 2020 c. 1, Sch. 5 para. 1(1)
Modifications
- C1
S. 11ZA(1A)(a) modified (20.5.2016) by The Standardised Packaging of Tobacco Products Regulations 2015 (S.I. 2015/829), regs. 1(2), 14(3)(4) (with regs. 14(5), 20)