OpenLegislation

Regulation 13 Turning circle—busesF7I1

England, Wales and Scotland

Original text. Later amendments are not shown.

(1)

This regulation applies to a bus first used on or after 1st April 1982.

(2)

Every vehicle to which this regulation applies shall be able to move on either lock so that F1, both with and without all its wheels in contact with the ground, no part of it projects outside the area contained between concentric circles with radii of F212.5 m and 5.3 m.

F3(2A)

In relation to a vehicle manufactured before 1st June 1998 paragraph (2) shall have effect as if the words “, both with and without all its wheels in contact with the ground,” were omitted.

(3)

When a vehicle to which this regulation applies moves forward from rest, on either lock, so that its outermost point describes a circle of F412.5 m radius, no part of the vehicle shall project beyond the longitudinal plane which, at the beginning of the manoeuvre, defines the overall width of the vehicle on the side opposite to the direction in which it is turning by more than—

(a)

0.8 m if it is a rigid vehicle F5of 12m or less in overall length; or

(b)

1.2 m if it is F6a rigid bus of over 12m in overall length or an articulated bus.

(4)

For the purpose of paragraph (3) the two rigid portions of an articulated bus shall be in line at the beginning of the manoeuvre.

Annotations

Textual amendments

F1

Words in reg. 13(2) inserted (1.6.1998) by The Road Vehicles (Construction and Use) (Amendment) (No. 3) Regulations 1998 (S.I. 1998/1188), regs. 1, 7(2)(a)

F2

Word in reg. 13(2) substituted (1.6.1998) by The Road Vehicles (Construction and Use) (Amendment) (No. 3) Regulations 1998 (S.I. 1998/1188), regs. 1, 7(2)(b)

F3

Reg. 13(2A) inserted (1.6.1998) by The Road Vehicles (Construction and Use) (Amendment) (No. 3) Regulations 1998 (S.I. 1998/1188), regs. 1, 7(3)

F4

Word in reg. 13(3) substituted (1.6.1998) by The Road Vehicles (Construction and Use) (Amendment) (No. 3) Regulations 1998 (S.I. 1998/1188), regs. 1, 7(4)

F5

Words in reg. 13(3)(a) inserted (1.4.2003) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2003 (S.I. 2003/182), regs. 1, 4(1)

F6

Words in reg. 13(3)(b) inserted (1.4.2003) by The Road Vehicles (Construction and Use) (Amendment) Regulations 2003 (S.I. 2003/182), regs. 1, 4(1)

F7

Reg. 13 heading substituted (19.3.1990) by The Road Vehicles (Construction and Use) (Amendment) Regulations 1990 (S.I. 1990/317), regs. 1, 5(1) (with reg. 2(a))

Commencement

I1

Reg. 13 in force at 11.8.1986, see reg. 1