Paragraph 10 I1
England, Wales and Scotland
Electrical connections–
Every main-beam headlamp shall be so constructed that the light emitted therefrom–
can be deflected at the will of the driver to become a dipped beam, or
can be extinguished by the operation of a device which at the same time either–
causes the lamp to emit a dipped beam, or
causes another lamp to emit a dipped beam.
Where a matched pair of main-beam headlamps is fitted they shall be capable of being switched on and off simultaneously and not otherwise.
I211 Tell-tale– (a) Any vehicle not covered by sub-paragraph (b): | A circuit-closed tell-tale shall be fitted |
(b) A motor vehicle first used before 1st April 1986: | No requirement |
Annotations
Commencement
- I1
Sch. 5 Pt. I para. 10 in force at 1.11.1989, see reg. 1(1)
- I2
Sch. 5 Pt. I para. 11 in force at 1.11.1989, see reg. 1(1)
Notes on Part I
Commencement
- I1
Sch. 5 Pt. I para. 1 in force at 1.11.1989, see reg. 1(1)
- I2
Sch. 5 Pt. I para. 2 in force at 1.11.1989, see reg. 1(1)
- I3
Sch. 5 Pt. I para. 3 in force at 1.11.1989, see reg. 1(1)
- I4
Sch. 5 Pt. I para. 4 in force at 1.11.1989, see reg. 1(1)
- I5
Sch. 5 Pt. I para. 5 in force at 1.11.1989, see reg. 1(1)
- I6
Sch. 5 Pt. I para. 6 in force at 1.11.1989, see reg. 1(1)
- I7
Sch. 5 Pt. I para. 7 in force at 1.11.1989, see reg. 1(1)
- I8
Sch. 5 Pt. I para. 8 in force at 1.11.1989, see reg. 1(1)
- I9
Sch. 5 Pt. I para. 9 in force at 1.11.1989, see reg. 1(1)