OpenLegislation

Part I Requirements Relating to Obligatory Rear Position Lamps and to Optional Rear Position Lamps to the Extent Specified in Part II

Northern Ireland

1

Number—

(a)

Any vehicle not covered by sub-paragraph (b), (c), (d), (e), (f), (g) or (h):

Two
(b)

A bus first used before 1st October 1958:

One
(c)

A solo motor bicycle:

One
(d)

A cycle with less than four wheels and without a sidecar:

One
(e)

A trailer drawn by a cycle and a trailer, the overall width of which does not exceed 800 mm, drawn by a solo motor bicycle or by a motor bicycle combination:

One
(f)

An invalid carriage having a maximum speed not exceeding 4 mph:

One
(g)

A vehicle drawn or propelled by hand:

One
(h)

A motor vehicle having three or more wheels and a maximum speed not exceeding 25 mph and a trailer drawn by any such vehicle if, in either case, the structure of the vehicle makes it impracticable to meet all of the relevant requirements of paragraphs 2 and 3 with two lamps:

Four
2

Position—

(a)

Longitudinal:

At or near the rear
(b)

Lateral—

(i)

Where two lamps are required to be fitted—

(A)

Maximum distance from the side of the vehicle—

(1)

Any vehicle not covered by sub- sub-head (2):

400 mm
(2)

A motor vehicle first used before 24th January 1996 and any other vehicle manufactured before 24th January 1996:

800 mm
(B)

Minimum separation distance between a pair of rear position lamps—

(1)

Any vehicle not covered by sub-sub-head (2):

500 mm. If the overall width of the vehicle is less than 1400 mm, 400 mm or if less than 800 mm, 300 mm
(2)

A motor vehicle first used before 24th January 1996 and any other vehicle manufactured before 24th January 1996:

No requirement
(ii)

Where one lamp is required to be fitted:

On the centre-line or off side of the vehicle
(iii)

Where four lamps are required to be fitted—

(A)

Maximum distance from the side of the vehicle—

(1)

One pair of lamps:

Such that they satisfy the relevant requirements in sub-head 2(b)(i)(A)
(2)

The other pair of lamps:

No requirement
(B)

Minimum separation distance between rear position lamps—

(1)

One pair of lamps:

Such that they satisfy the relevant requirements in sub-head 2(b)(i)(B)
(2)

The other pair of lamps:

No requirement
(c)

Vertical—

(i)

Maximum height above the ground where one or two rear position lamps are required to be fitted—

(A)

Any vehicle not covered by sub-head (B) or (C):

1500 mm or, if the superstructure makes this impracticable, 2100 mm
(B)

A bus first used before 24th January 1996:

1050 mm
(C)

A motor vehicle first used before 24th January 1996 not being a bus, a trailer manufactured before 24th January 1996, an agricultural vehicle, a horse-drawn vehicle, an industrial tractor and engineering plant:

2100 mm
(ii)

Maximum height above the ground where four rear position lamps are required to be fitted—

(A)

One pair of lamps:

Such that they satisfy the relevant requirements in paragraph 2(c)(i)
(B)

The other pair of lamps:

No requirement
(iii)

Minimum height above the ground:

350 mm
3

Angles of visibility—

(a)

A motor vehicle, other than a motor bicycle combination, first used on or after 24th January 1996 and a trailer manufactured on or after 24th January 1996—

(i)

Horizontal—

(A)

Where two lamps are required to be fitted:

45° inwards and 80° outwards
(B)

Where one lamp is required to be fitted:

80° to the left and to the right
(C)

Where four lamps are required to be fitted—

(1)

The outer pair of lamps:

0° inwards and 80° outwards
(2)

The inner pair of lamps:

45° inwards and 80° outwards
(ii)

Vertical—

(A)

Where one or two rear position lamps are required to be fitted—

(1)

Any vehicle not covered by sub-paragraph (2) or (3):

15° above and below the horizontal
(2)

Where the highest part of the illuminated area of the lamp is less than 1500 mm above the ground:

15° above and 10° below the horizontal
(3)

Where the highest part of the illuminated area of the lamp is less than 750 mm above the ground:

15° above and 5° below the horizontal
(B)

Where four rear position lamps are required to be fitted—

(1)

One pair of lamps:

Such that they satisfy the relevant requirements in paragraph 3(a)(ii)(A)
(2)

The other pair of lamps:

Visible to the rear
(b)

A motor vehicle, other than a motor bicycle combination, first used before 24th January 1996 and any other vehicle manufactured before 24th January 1996:

Visible to the rear
(c)

A vehicle drawn or propelled by hand, a pedal cycle, a horse-drawn vehicle and a motor bicycle combination:

Visible to the rear
4

Alignment:

To the rear
5

Markings (see also regulation 2(5))—

(a)

A motor vehicle or a trailer not covered by sub-paragraph (b), (c), (d) or (e):

An approval mark
(b)

A motor vehicle first used before 1st January 1974 and a trailer, other than a trailer drawn by a cycle, manufactured before that date:

No requirement
(c)

A solo motor bicycle and a motor bicycle combination, in each case first used before 24th January 1996, and a trailer manufactured before 24th January 1996 and drawn by a solo motor bicycle or a motor bicycle combination:

No requirement
(d)

A cycle, a trailer drawn by a cycle, an invalid carriage having a maximum speed not exceeding 4 mph, a horse-drawn vehicle and a vehicle drawn or propelled by hand in each case manufactured before 24th January 1996:

An approval mark or a British Standard mark
(e)

A cycle, a trailer drawn by a cycle, an invalid carriage having a maximum speed not exceeding 4 mph, a horse-drawn vehicle and a vehicle drawn or propelled by hand in each case manufactured on or after 24th January 1996.

An approval mark or the British Standard mark which is specified in F1sub-paragraph (c), (d) or (e) of the definition of “British Standard mark”
6

Size of illuminated area:

No requirement
7

Colour:

Red
8

Wattage:

No requirement
9

Intensity—

(a)

A rear position lamp bearing any of the markings mentioned in paragraph 5:

No requirement
(b)

Any other rear position lamp:

Visible from a reasonable distance
10

Electrical connections:

No individual requirement
11

Tell-tale:

No requirement
  1. 12Paragraph 12
  2. 13Paragraph 13

Annotations

Textual amendments

F1

Words in Sch. 10 Pt. I substituted (5.7.2007) by The Road Vehicles Lighting (Amendment) Regulations (Northern Ireland) 2007 (S.R. 2007/239), regs. 1(1), 10(2)