Article 4 Amendments to Part 1 (requirements) of Schedule 2

In paragraph 2 of Part 1 (requirements) of Schedule 2—

(a)

in sub-paragraph 1(d)—

(i)

omit “have a distance of less than 30 metres between the lowest point of the rotating blade of the wind turbine generator and HAT;” and

(ii)

insert “not used;”

(b)

delete sub-paragraph (2) and insert—

“(2)

Within Work No. 1A—

(a)

The total rotor swept area must not exceed 1.42 square kilometres; and

(b)

the total rotor-swept area and the corresponding air gap for each wind turbine generator must accord with the parameters specified below—

Where the Total Rotor-Swept Area is Minimum Air Gap (m)

1.01km² or less 30
Greater than 1.01km²and up to 1.13km² 31
Greater than 1.13km² and up to 1.42km ² 32

”.

Where the Total Rotor-Swept Area is	Minimum Air Gap (m)
1.01km² or less	30
Greater than 1.01km²and up to 1.13km²	31
Greater than 1.13km² and up to 1.42km ²	32

(c)

delete paragraph (3) and insert—

“(3)

Within Work No. 1B—

(a)

The total rotor swept area must not exceed 1.85 square kilometres; and

(b)

the total rotor-swept area and the corresponding air gap for each wind turbine generator must accord with the parameters specified below—

Where the Total Rotor-Swept Area is Minimum Air Gap (m)

1.31km² or less 30
Greater than 1.31km²and up to 1.47km² 31
Greater than 1.47km² and up to 1.85km ² 32

”.

Where the Total Rotor-Swept Area is	Minimum Air Gap (m)
1.31km² or less	30
Greater than 1.31km²and up to 1.47km²	31
Greater than 1.47km² and up to 1.85km ²	32