Paragraph 1 Design parametersI1

England and Wales

Wind turbine generators

(1)

Wind turbine generators forming part of the authorised project must not—

(a)

exceed a height of 330 metres when measured from HAT to the tip of the vertical blade;

(b)

exceed a rotor diameter of 300 metres;

(c)

be less than 1.05 kilometres from the nearest wind turbine generator in any direction; or

(d)

have a distance of less than 30 metres between the lowest point of the rotating blade of the wind turbine generator and HAT;

(e)

exceed 23 wind turbine generators in respect of the Sheringham Shoal Extension Project offshore works; or

(f)

exceed 30 wind turbine generators in respect of the Dudgeon Extension Project offshore works.

(2)

The total rotor-swept area within Work No. 1A must not exceed 1.00 square kilometres.

(3)

References to the location of a wind turbine generator are references to the centre point at the base of the wind turbine generator.

Annotations