Regulation 16 Obligations of authorised representativeE1
England, Wales and Scotland
The obligations laid down in regulation 4 (design and manufacture in accordance with essential safety requirements and sound engineering practice) and in of regulation 5(a) (technical documentation and conformity assessment for category A vessels) must not form part of an authorised representative's mandate.
The mandate must allow the authorised representative to do at least the following in relation to a vessel covered by the mandate—
perform the manufacturer's obligations under regulation 8 (retention by manufacturer of technical documentation and F1... declaration of conformity); and
perform the manufacturer's obligations under regulation 14 (provision of information and cooperation).
An authorised representative must comply with all the duties imposed on the manufacturer in relation to each obligation under these Regulations that the representative is appointed by the mandate to perform and accordingly as far as those duties are concerned, as well as the penalties for failure to comply with those duties, a reference in these Regulations (except in regulation 15) to the manufacturer is to be taken as including a reference to the authorised representative.
Annotations
Textual amendments
- F1
Word in reg. 16(2)(a) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 12 (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Extent
- E1
This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Notes on the whole SI
Textual amendments
- F1
- F2
1972 c.68. Section 2(2) was amended by section 27(1)(a) of the Legislative and Regulatory Reform Act 2006 (c.51) and by Part 1 of the Schedule to the European Union (Amendment) Act 2008 (c.7). The enabling powers of section 2(2) were extended by virtue of the amendment of section 1(2) by section 1 of the European Economic Area Act 1993 (c.51).
- F3
Paragraph 1A of Schedule 2 was inserted by section 28 of the Legislative and Regulatory Reform Act 2006 and amended by Part 1 of the Schedule to the European Union (Amendment) Act 2008.