Regulation 44 Identification numberE1

England, Wales and Scotland

F1(1)

The UK marking must be followed by the identification number of the approved body involved in the relevant conformity assessment procedure pursuant to regulation 41.

(2)

The identification number of theF2approved body must be affixed—

(a)

by the approved body; or

(b)

where instructed to do so by the approved body, by the manufacturer or the manufacturer's authorised representative.

Annotations

Textual amendments

F1: Reg. 44(1) substituted (31.12.2020) by y The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 29(a) (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 13(7)); 2020 c. 1, Sch. 5 para. 1(1)
F2: Word in reg. 44(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 29(b) (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Extent

E1: This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Notes on the whole SI

Textual amendments

F1: S.I. 1989/1327.
F2: 1972 c.68. Section 2(2) was amended by section 27(1)(a) of the Legislative and Regulatory Reform Act 2006 (c.51) and by Part 1 of the Schedule to the European Union (Amendment) Act 2008 (c.7). The enabling powers of section 2(2) were extended by virtue of the amendment of section 1(2) by section 1 of the European Economic Area Act 1993 (c.51).
F3: Paragraph 1A of Schedule 2 was inserted by section 28 of the Legislative and Regulatory Reform Act 2006 and amended by Part 1 of the Schedule to the European Union (Amendment) Act 2008.