Surface Waters (Dangerous Substances) (Classification) Regulations (Northern Ireland) 1998
S.R. 1998/397 · Made 16 November 1998
WATER AND SEWERAGE
Made 16th November 1998
Coming into operation 1st February 1999
The Department of the Environment, in exercise of the powers conferred by section 4B(1) and (2) of the Water Act (Northern Ireland) 1972f1 and now vested in itf2, and by Article 56B(1) and (2) of the Water and Sewerage Services (Northern Ireland) Order 1973f3, and of every other power enabling it in that behalf, hereby makes the following Regulations:
Annotations to the whole text
Footnotes
- f1
-
1972 c. 5 (N.I.) as amended by the Water and Sewerage Services (Amendment) (Northern Ireland) Order 1993 S.I. 1993/3165 (N.I. 16) Art. 16
- f2
- f3
-
S.I. 1973/70 (N.I. 2) as amended by S.I. 1993/3165 (N.I. 16) Art. 12
Contents
- 1Citation and commencement
- 2Interpretation
- 3Classification of waters
- 4Sampling and analysis
- 5Modification of Section 4C of the Water Act (Northern Ireland) 1972
- 6Revocations
- Signature
- Schedule 1Criteria for Classification DS1
- Schedule 2Criteria for Classification DS2
- Schedule 3Criteria for Classification DS3
- Schedule 4: Criteria for Classification DS4
- 1Paragraph 1
- 2Paragraph 2
- Schedule 5: Criteria for Classification DS5
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- Schedule 6: Criteria for Classification DS6
- 1Paragraph 1
- 2Paragraph 2
- Schedule 7: Criteria for Classification DS7
- 1Paragraph 1
- 2Paragraph 2
- Explanatory note
1Citation and commencement
These Regulations may be cited as the Surface Waters (Dangerous Substances) (Classification) Regulations (Northern Ireland) 1998 and shall come into operation on 1st February 1999.
2Interpretation
In these Regulations—
-
“coastal waters” means any tidal waters which are within the area which extends landward from the baselines from which the breadth of the territorial sea adjacent to Northern Ireland is measured as far as the fresh-water limit of any waterway;
-
“inland freshwaters” means that part of any waterway above the freshwater limit; and
-
“relevant territorial waters” means the waters which extend seaward for 3 miles from the baselines from which the breadth of the territorial sea adjacent to Northern Ireland is measured.
3Classification of waters
The classification DS1 and the criteria for that classification set out in Schedule 1 shall apply for classifying inland freshwaters.
The classification DS2 and the criteria for that classification set out in Schedule 2 shall apply for classifying coastal waters and relevant territorial waters.
The classification DS3 and the criteria for that classification set out in Schedule 3 shall apply for classifying relevant territorial waters, coastal waters and inland freshwaters.
The classification DS4 and the criteria for that classification set out in Schedule 4 shall apply for classifying inland freshwaters with a view to reducing the pollution of those waters by the substances listed in that Schedule.
The classification DS5 and the criteria for that classification set out in Schedule 5 shall apply for classifying coastal waters and relevant territorial waters with a view to reducing the pollution of those waters by the substances listed in that Schedule.
The classification DS6 and the criteria for that classification set out in Schedule 6 shall apply for classifying inland freshwaters with a view to reducing the pollution of those waters by the substances listed in that Schedule.
The classification DS7 and the criteria for that classification set out in Schedule 7 shall apply for classifying coastal waters and relevant territorial waters with a view to reducing the pollution of those waters by the substances listed in that Schedule.
4Sampling and analysis
The provisions of this regulation apply as respects the taking of samples of inland freshwaters, coastal waters and relevant territorial waters in relation to their classification in accordance with regulation 3.
Samples shall be taken under this regulation at a frequency sufficient to show any changes in the aquatic environment, having regard in particular to natural variations in hydrological conditions.
Where a discharge containing any substance listed in column (1) of any of the Schedules is made to waters mentioned in paragraph (1), samples shall be taken at a point sufficiently close to the discharge point to be representative of the quality of the aquatic environment in the area affected by the discharge,
Samples taken under this regulation in relation to relevant territorial waters, coastal waters or inland freshwaters to which the classification DS1, DS2 or DS3 is for the time being applied shall be analysed using the relevant reference method of measurement respectively specified in column (3) of Schedule 1, 2 or 3 or other methods which have limits of detection, precision and accuracy at least as good.
5Modification of Section 4C of the Water Act (Northern Ireland) 1972
Section 4C of the Water Act (Northern Ireland) 1972f1 shall have effect as if–
it imposed a duty on the Department to exercise the powers conferred on it by that section to apply the classification–
DS1 to all inland freshwaters;
DS2 to all coastal waters and relevant territorial waters;
DS3 to all relevant territorial waters, coastal waters and inland freshwaters;
DS4 to all inland freshwaters;
DS5 to all coastal waters and relevant territorial waters;
DS6 to all inland freshwaters;
DS7 to all coastal waters and relevant territorial waters; and
in relation to the establishment of water quality objectives in pursuance of that duty, subsections (3) to (7) of that section were omitted.
6Revocations
Signature
Sealed with the Official Seal of the Department of the Environment on
L.S.
R. W. Rogers
Assistant Secretary
16th November 1998.
Schedule 1Criteria for Classification DS1
The criteria for the classification DS1 are that the annual mean concentration of each substance listed in column (1) of Table 1 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit specified in column (2) of that Table.
TABLE 1
| (1) | (2) | (3) |
|---|---|---|
| Substance | Concentration in microgrammes per litre (annual mean) | Reference method of measurement |
| ||
| Aldrin Dieldrin Endrin Isodrin | 0.01 0.01 0.005 0.005 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent with a limit of determination of 2.5 ng/1(1). |
| Cadmium and its compounds | 5 (total cadmium: both soluble and insoluble forms) | Atomic absorption spectrophotometry after preservation and suitable treatment of the sample. The limit of determination is .25 µg/litre(2). |
| Carbon tetrachloride | 12 | Gas chromatography. The limit of determination is 0.1 µg/litre(1). |
| Chloroform | 12 | Gas chromatography. The limit of determination is 0.1 µg/1itre(1). |
| DDT (all isomers) | 0.025 | Gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination for total DDT is approximately 4 ng/l, depending on the number of extraneous substances present in the sample(1). |
| para-para-DDT | 0.01 | Gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination for total DDT is approximately 4 ng/l, depending on the number of extraneous substances present in the sample(1). |
| Hexachlorobenzene | 0.03 | Gas chromatography with electron capture after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1 depending on the number of extraneous substances present in the sample(1). |
| Hexachlorobutadiene | 0.1 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1, depending on the number of extraneous substances present in the sample(1). |
| Hexachlorocyclohexane (all isomers) | 0.1 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1 depending on the number of extraneous substances present in the sample(1). |
| Mercury and its compounds | 1 (total mercury: both soluble and insoluble forms) | Flameless atomic absorption spectrophotometry after suitable pre-treatment of the sample which takes account in particular of pre-oxidation of the mercury and of successive reduction of the mercury ions Hg(II). The limit of detection must be 0.1 µg/litre(2). |
| Pentachlorophenol and its compounds | 2 | High pressure liquid chromatography or gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination is 0.1 µg/litre(1). |
Schedule 2Criteria for Classification DS2
The criteria for the classification DS2 are that the annual mean concentration of each substance listed in column (1) of Table 2 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit specified in column (2) of that Table.
TABLE 2
| (1) | (2) | (3) |
|---|---|---|
| Substance | Concentration in microgrammes per litre (annual mean) | Reference method of measurement |
| ||
| Aldrin Dieldrin Endrin Isodrin | 0.01 0.01 0.005 0.005 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent with a limit of determination of 2.5 ng/1(1). |
| Cadmium and its compounds | 2.5 (dissolved cadmium) | Atomic absorption spectrophotometry after preservation and suitable treatment of the sample. The limit of determination is .25 µg/litre(2). |
| Carbon tetrachloride | 12 | Gas chromatography. The limit of determination is 0.1 µg/litre(1). |
| Chloroform | 12 | Gas chromatography. The limit of determination is 0.1 µg/litre(1). |
| DDT (all isomers) | 0.025 | Gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination for total DDT is approximately 4 ng/l, depending on the number of extraneous substances present in the sample(1). |
| para-para-DDT | 0.01 | Gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination for total DDT is approximately 4 ng/l, depending on the number of extraneous substances present in the sample(1). |
| Hexachlorobenzene | 0.03 | Gas chromatography with electron capture after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1 depending on the number of extraneous substances present in the sample(1). |
| Hexachlorobutadiene | 0.1 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1, depending on the number of extraneous substances present in the sample(1). |
| Hexachlorocyclohexane (all isomers) | 0.02 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent. The limit of determination shall be within the range 1 to 10 ng/1 depending on the number of extraneous substances present in the sample(1). |
| Mercury and its compounds | 0.3 (dissolved mercury) | Flameless atomic absorption spectrophotometry after suitable pre-treatment of the sample which takes account in particular of pre-oxidation of the mercury and of successive reduction of the mercury ions Hg(II). The limit of detection must be .03 µg/litre(2). |
| Pentachlorophenol and its compounds | 2 | High pressure liquid chromatography or gas chromatography with electron capture detection after extraction by means of a suitable solvent. The limit of determination is 0.1 µg/litre(1). |
Schedule 3Criteria for Classification DS3
The criteria for the classification DS3 are that the annual mean concentration of each substance listed in column (1) of Table 3 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit specified in column (2) of that Table.
TABLE 3
| (1) | (2) | (3) |
|---|---|---|
| Substance | Concentration in microgrammes per litre (annual mean) | Reference method of measurement |
| Note The accuracy and precision of the method must be plus or minus 50% at a concentration which represents twice the value of the limit of determination. | ||
| 1,2-Dichloroethane | 10 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent or gas chromatography following isolation by means of the “purge and trap” process and trapping by using a cryogenically cooled capillary trap. The limit of determination is 1 µg/litre. (see Note) |
| Trichloroethylene Perchloroethylene | 10 10 | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent. The limit of determination is 0.1 µg/litre. (see Note) |
| Trichlorobenzene | 0.4 (but there must be no significant increase over time in the concentration of trichlorobenzene in sediments and/or molluscs and/or shellfish and/or fish) | Gas chromatography with electron capture detection after extraction by means of an appropriate solvent or, when used to determine the concentration in sediments and organisms, after appropriate preparation of the sample. The limit of determination for each isomer separately is 10 ng/1 for the water environment and 1 µg/kg of dry matter for sediments and organisms. (see Note) |
1
Subject to paragraph 2, the criteria for the classification DS4 are that—
the annual mean concentration of each substance listed in column (1) of Table 4 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit shown in column (2) of that Table; and
the concentration of each substance listed in column (1) of Table 5 in each sample so taken does not exceed the relevant limit shown in column (2) of that Table.
2
Where samples are taken in accordance with regulation 4 from more than one sampling point in relation to the waters in question, the criterion in paragraph 1(a) shall be satisfied in relation to the samples from each sampling point.
TABLE 4
| (1) | (2) |
|---|---|
| Substance | Limit (in microgrammes per litre) (annual mean) |
| Arsenic | 50 |
| Atrazine and Simazine | 2 (for the two substances in total) |
| Azinphos-methyl | 0.01 |
| Dichlorvos | 0.001 |
| Endosulphan | 0.003 |
| Fenitrothion | 0.01 |
| Malathion | 0.01 |
| Trifluralin | 0.1 |
TABLE 5
| (1) | (2) |
|---|---|
| Substance | Limit (in microgrammes per litre) |
| Triphenyltin and its derivatives | 0.02 |
| Tributyltin | 0.02 |
1
Subject to paragraph 2, the criteria for the classification DS5 are that—
the annual mean concentration of each substance listed in column (1) of Table 6 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit shown in column (2) of that Table; and
subject to paragraph 3, the concentration of each substance listed in column (1) of Table 7 in each sample so taken does not exceed the relevant limit shown in column (2) of that Table.
2
Where samples are taken in accordance with regulation 4 from more than one sampling point in relation to the waters in question, the criterion in paragraph 1(a) shall be satisfied in relation to the samples from each sampling point.
3
In relation to dichlorvos used as a treatment for sea-lice infestation, compliance with the relevant limit in column (2) of Table 7 shall be determined by reference only to samples taken as nearly as may be after 24 hours have elapsed since it was so used.
TABLE 6
| (1) | (2) |
|---|---|
| Substance | Limit (in microgrammes per litre) (annual mean) |
| Arsenic | 25 |
| Atrazine and Simazine | 2 (for the two substances in total) |
| Azinphos-methyl | 0.01 |
| Dichlorvos | 0.04 |
| Endosulphan | 0.003 |
| Fenitrothion | 0.01 |
| Malathion | 0.02 |
| Trifluralin | 0.1 |
TABLE 7
| (1) | (2) |
|---|---|
| Substance | Limit (in microgrammes per litre) |
| Dichlorvos | 0.6 |
| Tributyltin | 0.002 |
| Triphenyltin and its derivatives | 0.008 |
1
Subject to paragraph 2, the criteria for the classification DS6 are that—
the annual mean concentration of each substance listed in column (1) of Table 8 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant concentration specified in column (2) of that Table; and
the concentration of mevinphos in each sample so taken does not exceed 0.02 microgrammes per litre.
2
Where samples are taken in accordance with regulation 4 from more than one sampling point in relation to the waters in question, the criterion in paragraph 1(a) shall be satisfied in relation to the samples from each sampling point.
TABLE 8
| (1) | (2) |
|---|---|
| Substance | Annual mean concentration in microgrammes per litre |
| 4-Chloro-3-methyl-phenol | 40 |
| 2-Chlorophenol | 50 |
| 2,4-Dichlorophenol | 20 |
| 2,4-D (ester) | 1 |
| (non-ester) | 40 |
| 1,1,1-Trichloroethane | 100 |
| 1,1,2-Trichloroethane | 400 |
| Bentazone | 500 |
| Benzene | 30 |
| Biphenyl | 25 |
| Chloronitrotoluenes | 10 |
| Demeton | 0.5 |
| Dimethoate | 1 |
| Linuron | 2 |
| Mecoprop | 20 |
| Naphthalene | 10 |
| Omethoate | 0.01 |
| Toluene | 50 |
| Triazaphos | 0.005 |
| Xylene | 30 |
1
Subject to paragraph 2, the criteria for the classification DS7 are that the annual mean concentration of each substance listed in column (1) of Table 9 in samples taken from the sampling point for the waters in question in accordance with regulation 4 does not exceed the relevant limit shown in column (2) of that Table.
2
Where samples are taken in accordance with regulation 4 from more than one sampling point in relation to the waters in question, the criterion in paragraph 1 shall be satisfied in relation to the samples from each sampling point.
TABLE 9
| (1) | (2) |
|---|---|
| Substance | Limit (in microgrammes per litre) (annual mean) |
| 4-Chloro-3-methyl-phenol | 40 |
| 2-Chlorophenol | 50 |
| 2,4-Dichlorophenol | 20 |
| 2,4-D (ester) | 1 |
| (non-ester) | 40 |
| 1,1,1-Trichloroethane | 100 |
| 1,1,2-Trichloroethane | 300 |
| Bentazone | 500 |
| Benzene | 30 |
| Biphenyl | 25 |
| Chloronitrotoluenes | 10 |
| Demeton | 0.5 |
| Dimethoate | 1 |
| Linuron | 2 |
| Mecoprop | 20 |
| Naphthalene | 5 |
| Toluene | 40 |
| Triazaphos | 0.005 |
| Xylene | 30 |
Explanatory note
(This note is not part of the Regulations.)
These Regulations prescribe a system of classifying the quality of inland freshwaters, coastal waters and relevant territorial waters (as defined in regulation 2).
Regulation 3 and Schedules 1 to 7 create a system for classifying waters according to the presence in them of concentrations of the dangerous substances listed in the Schedules.
Sampling requirements are prescribed in regulation 4.
Regulation 5, by modifying section 4C of the Water Act (Northern Ireland) 1972, requires (and enables) the Department of the Environment to establish water quality objectives for those dangerous substances by applying the classifications prescribed in the Regulations. The Regulations, in requiring the establishment of water quality objectives for the dangerous substances listed in the Schedules, fulfil the requirements of Articles 3 and 7 of Council Directive 76/464/EEC in relation to the families and groups of substances within List I and List II respectively of that Directive.
Regulation 6 revokes the Pollution of Waters by Dangerous Substances Regulations (Northern Ireland) 1990 and the Pollution of Waters by Dangerous Substances (Amendment) Regulations (Northern Ireland) 1992, which formerly imposed controls on discharges of substances within List I of that Directive.