OpenLegislation

Paragraph H.2

Development is not permitted by Class H if—

(a)

in the case of the installation of a wind turbine the development would result in the presence of more than 1 wind turbine on the same building or within the curtilage;

(b)

in the case of the installation of a wind turbine, a stand-alone wind turbine is installed within the curtilage of the dwellinghouse or the block of flats;

(c)

in the case of the installation of a wind turbine, an air source heat pump is installed on the same building or within its curtilage;

(d)

the highest part of the wind turbine (including blades) would either—

(i)

protrude more than 3 metres above the highest part of the roof (excluding the chimney); or

(ii)

exceed more than 15 metres in height,

whichever is the lesser;

(e)

the distance between ground level and the lowest part of any blade of the wind turbine would be less than 5 metres;

(f)

any part of the wind turbine (including blades) would be positioned so that it would be within 5 metres of any boundary of the curtilage of the dwellinghouse or the block of flats;

(g)

the swept area of any blade of the wind turbine would exceed 3.8 square metres;

(h)

the wind turbine would be installed on safeguarded land;

(i)

the wind turbine would be installed on a site designated as a scheduled monument;

(j)

the wind turbine would be installed within the curtilage of a building which is a listed building;

(k)

in the case of land within a conservation area, the wind turbine would be installed on a wall or roof slope of—

(i)

the detached dwellinghouse; or

(ii)

a building within the curtilage of the dwellinghouse or block of flats,

which fronts a highway; or

(l)

the wind turbine would be installed on article 2(3) land other than land within a conservation area.