Regulation 30 Amendment of Schedule 16F1I1
England, Wales and Scotland
Schedule 16 (permitted variants) is amended as follows.
In column (2) of item 1—
after “530,” insert “530A,”;
for “532.2, 532.3,” substitute “532.2, 532.2A, 532.3, 532.3A,”;
after “818.3 (other than in respect of distance),” insert “818.5,”; and
after “6001,” insert “7014.1,”.
Omit—
“
2.629.1Metric units to one decimal place of a metre may be substituted for imperial units when the sign is placed in combination with another sign shown in diagram 629.1 which has not been so varied.”
In column (2) of item 3—
omit “2601.1,”; and
for “2511, 2512,” substitute “2511.1, 2512.1,”.
In column (2) of item 5, after “2602.1,” insert “2602.1A,”.
In item 6—
in column (2)—
after “and 818.3 (in respect of distance),” insert “818.4, 818.5,”;
for “2511, 2512,” substitute “2511.1, 2512.1,”; and
after “2701.1,” insert “2711.1,”; and
in column (3)—
in paragraph (1), for “Numerals indicating distance” substitute “Subject to paragraph (4), numerals indicating distance”;
in paragraph (2), for “diagram 2316” substitute “diagram 818.3”; and
after paragraph (3), insert—
“(4)
Where emergency exits are more than 880 yards apart, distances shown on the sign shown in diagram 2711.1 shall be expressed in miles to the nearest ¼ mile with the fractions ¾, ½ and ¼ being used.”.
In column (2) of item 8—
for “2310.1” substitute “2310.2”; and
for “2919.1*” substitute “2919.2*”.
In column (2) of item 9—
after “2508,” insert “2601.1,”; and
after “2602.1,” insert “2602.1A,”.
In column (2) of item 11—
after “660.6,” insert “660.8, 660.9,”;
omit “818.3, 818.4,”; and
after “820,” insert “820A,”.
In column (2) of item 12—
for “2511” substitute “2511.1”; and
after “2601.1,” insert “2601.1A, 2602.1A, 2602.1C,”.
In column (2) of item 13, after “2711*,” insert “2711.1*,”.
In column (2) of item 15—
for “2512” substitute “2512.1”; and
after “2602.1,” insert “2602.1B,”.
In column (2) of item 16, after “2513,” insert “2601.1, 2601.1A,”.
In column (2) of item 19—
after “818.4,” insert “818.5,”;
after “2601.1,” insert “2601.1A,”; and
after “2602.1,” insert “2602.1A, 2602.1B, 2602.1C,”.
In column (2) of item 20—
after “818.4**,” insert “818.5**,”;
after “2601.1,” insert “2601.1A,”; and
after “2602.1,” insert “2602.1A, 2602.1B, 2602.1C,”.
In column (2) of item 28—
after “818.4,” insert “820A,”;
after “2329,” insert “2502,”;
for “2511, 2512,” substitute “2511.1, 2512.1,”;
omit “2602.1,”;
after “2711,” insert “2711.1,”;
after “4003.1,” insert “4003.1A,”; and
after “4003.4,” insert “4003.4A,”.
In column (2) of item 29, omit “2602.1,”.
In item 31—
in column (2), for “2511*, 2512*,” substitute “2511.1*, 2512.1*,”; and
in column (3), after “530,” insert “530A,”.
In item 34—
in column (2)—
for “2511, 2512,” substitute “2511.1, 2512.1,”;
after “2601.1,” insert “2601.1A,”; and
after “2602.1,” insert “2602.1A, 2602.1B, 2602.1C,”; and
in paragraph (7) of column (3), for “2310.1” substitute “814.2”.
In column (2) of item 38—
after “637.2*,” insert “637.2A*,”;
after “660.7,” insert “660.9,”;
after “663.1,” insert “663.2, 663.3,”;
omit “962.2,”; and
for “2511, 2512,” substitute “2511.1, 2512.1,”.
In column (2) of item 39—
after “660.7,” insert “660.9,”; and
after “663.1” insert “, 663.2, 663.3”.
After item 46, insert—
“
47.3000Where the character or layout of the road restricts the visibility of the signals shown in the diagram, the maximum height of 4000 millimetres may be increased as appropriate to a maximum of 6100 millimetres.”
Annotations
Textual amendments
- F1
Pt. 1 revoked (22.4.2016) by The Traffic Signs Regulations and General Directions 2016 (S.I. 2016/362), reg. 1(1)(b), Sch. 19 Pt. 1 (with regs. 4, 14, 15)
Commencement
- I1
Reg. 30 in force at 30.1.2012, see reg. 1(1)(c)