Paragraph 1 Registration mark - specificationI1

in the following prescribed font—

or

in a style which is substantially similar to that prescribed font, so that each character is—

1. (i)

   easily distinguishable, and

2. (ii)

   not formed in a way described in sub-paragraph (10), or in a manner which is similar to any of those ways.

be 64 millimetres in height;

have a width of 44 millimetres, except for the character representing the number “1” and letter “I”, which must have a width of 10 millimetres;

have a stroke width of 10 millimetres; and

be separated by 10 millimetres from any other characters within a group.

in the case of a horizontal spacing requirement, between vertical lines passing through the extreme edges of each character or between the lateral edge of the plate and a vertical line passing through the closest extreme edge of a character to that edge; and

in the case of a vertical spacing requirement, between horizontal lines passing through the extreme edges of each group of characters or between the top or bottom edge of the plate and a horizontal line passing through the closest extreme edge of a character to that edge.

the height of the character is not more than 1 millimetre more or less than the specified height; and

any other dimension of the character or the space in question is not more than 0.5 millimetres more or less than the specified measurement.

in italic script;

using a font, other than italic script, in which the characters are not vertical;

using a font in which the curvature or alignment of the lines of the stroke is substantially different from the prescribed font;

using multiple strokes;

using a broken stroke; or

in such a way as to make a character or more than one character appear like a different character or characters.