OpenLegislation

Explanatory note

Original text. Later amendments are not shown.

(This note is not part of the Regulations.)

These Regulations prescribe filling and discontinuous totalising automatic weighing machines for the purposes of Article 9(1) of the Weights and Measures (Northern Ireland) Order 1981 and exclude them from the application of the Weights and Measures Regulations (Northern Ireland) 1967 (where they were formerly prescribed within the class of automatic weighing machines) except in so far as such machines are capable of also being used as a counter machine, platform weighing machine or a weighbridge.

The Regulations make provision as to:

(a)

the purposes for which such automatic weighing machines may be used for trade (Regulation 4);

(b)

the materials and principles of construction of them and their marking (Regulations 5 to 18, 24 and 25);

(c)

their manner of erection and use for trade (Regulations 19 to 21 and 26 to 30);

(d)

their testing, passing as fit for use for trade and stamping and the obliteration of such stamps (Regulations 22, 23, 24, 31, 32 and 34 to 40 and Schedules 1 and 2);

(e)

the prescribed limits of error (Regulation 33 and Schedule 3).

The Regulations make the following changes of substance:—

(i)

a requirement has been included to ensure that automatic weighing machines shall not be used for trade below specified minimum loads or above their maximum capacity (Regulation 4);

(ii)

a requirement has been included to limit the range of adjustment of any zero-setting devices on automatic weighing machines designed to compensate for the wear and tear of ordinary use in trade (Regulation 8);

(iii)

a requirement has been included to provide facilities for easy and practicable weighings, for test purposes, on automatic weighing machines where visual indication of individual weighings is incorporated (Regulation 9);

(iv)

there are new requirements for the principles of construction and marking for filling machines (Regulations 14 to 17);

(v)

there are new requirements for the manner of erection and use for trade of filling machines (Regulations 19 to 21);

(vi)

a requirement has been included to ensure that filling machines intended to be permanently installed and discontinuous totalisers shall be completely erected on site before being tested, passed as fit for use for trade and stamped (Regulations 22(2) and 31(1));

(vii)

provision has been made that a person submitting automatic weighing machines to an inspector for testing, or who an inspector has reasonable cause to believe has control of such machines for use for trade shall, if requested, make available for the inspector's use such material in his possession as the inspector may reasonably require (Regulations 22(3) and 31(3));

(viii)

a requirement has been included to ensure that all installations of discontinuous totalisers have provisions for the depositing and collection of test material in a reliable and easy manner (Regulation 26(1));

(ix)

a requirement has been included to ensure that a non-automatic weighing machine is available for use, where necessary, in the vicinity of any discontinuous totaliser used for trade (Regulation 26(2));

(x)

a requirement has been included to ensure that access is provided for cleaning of discontinuous totalisers (Regulation 28(2));

(xi)

the grounds on which an inspector shall, or may, obliterate the stamp on automatic weighing machines have been widened (Regulations 38 and 39);

(xii)

the test requirements for all automatic weighing machines are set out in more detail (Schedules 1 and 2);

(xiii)

the prescribed limits of error for filling machines used only for weighing solid fuel have been reduced (Schedule 3, Table 1); and

(xiv)

a requirement for the inspector to determine the repeatability error has been introduced for the material testings on discontinuous totalisers (Schedule 2, paragraphs 6(6) and 9(8) and Schedule 3, Table 2).

Contravention of Regulations 4, 12, 19, 20, 21, 26, 27, 28, 29 and 30 is an offence under Article 13(1) of the Weights and Measures (Northern Ireland) Order 1981. It is also an offence under Article 9(2) of that Order for a person to use for trade or have in his possession for such use any automatic weighing machine prescribed by Regulation 3 which has not been passed as fit for such use and which does not bear a stamp indicating that it has been so passed which remains undefaced otherwise than by reason of fair wear and tear. In the case of an automatic weighing machine required by these Regulations to be passed and stamped only after it has been installed in the position or at the place where it is to be used, it is an offence under Article 9(11) of the Order knowingly to use such a machine if it has been dismantled and reinstalled unless it has been passed after reinstallation. It is also an offence knowingly to cause or permit any other person so to use it or, knowing that the machine has to be passed again, to dispose of it to some other person without informing him of that requirement. The penalty on summary conviction for all these offences is a fine not exceeding £400 and the machine in respect of which the offence is committed is liable to forfeiture.