OpenLegislation

Schedule 3 PRESCRIBED LIMITS OF ERROR

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

FILLING MACHINES

TABLE 1

Description of machineMaximum capacity of machine In relation to passing as fit for use for tradeIn relation to the obliteration of the stamp
for the purposes of test Afor the purposes of test Bfor the purposes of test Afor the purposes of test B
(1)(2)(3)(4)(5)(6)
Filling machines for use only for weighing potato crisps and other similar products commonly known as snack foodsany capacity20 per cent., in excess only, of the total purported weight of 20 test loads, and no error in deficiency of the purported weight of any of those test loadstest not applicable20 per cent., in excess only, of the total purported weight of 20 test loads, and no error in deficiency of the purported weight of any of those test loadstest not applicable
Filling machines for use only for weighing solid fuel110 kg or less1 per cent., in excess only, of the purported weight of each test load1 per cent., in excess and no limit in deficiency, of the purported weight of each test load2 percent., in excess only, of the purported weight of each test load2 per cent., in excess and no limit in deficiency, of the purported weight of each test load
Filling machines for use only for weighing vegetable produce55 kg or less
All filling machines other than those described in columns 1 and 2less than 5 kg
5 kg or more0.5 per cent., in excess or in deficiency, of the purported weight of each test loadtest not applicable1 per cent., in excess or in deficiency, of the purported weight of each test loadtest not applicable

DISCONTINUOUS TOTALISERS

TABLE 2

Test applicableIn relation to passing as fit for use for tradeIn relation to the obliteration of the stamp
(1)(2)(3)
Material testingPlus or minus 0.5 per cent. of the weight of material used in each test determined as described in paragraph 6(5)(a) in Part II or 9(4)(a) in Part III of Schedule 2.Plus or minus 1 percent. of the weight of material used in each test determined as described in paragraph 6(5)(a) in Part II or 9(4)(a) in Part III of Schedule 2.
Repeatability0.5 per cent. of the average value of the loads used in the individual tests in accordance with paragraph 6(3) in Part II or 9(5) in Part III of Schedule 2, the weight of which being determined as described in paragraph 6(5)(a) in Part II or 9(4)(a) in Part III of Schedule 2.1 percent. of the average value of the loads used in the individual tests in accordance with paragraph 6(3) in Part II or 9(5) in Part III of Schedule 2, the weight of which being determined as described in paragraph 6(5)(a) in Part II or 9(4)(a) in Part III of Schedule 2.