OpenLegislation

Regulation 22 I1

England, Wales and Scotland

Original text. Later amendments are not shown.

(1)

Every filling machine submitted for testing shall be completely assembled and in a clean condition.

(2)

A filling machine, other than one which has been transported without having been dismantled F1or is one where an inspector is satisfied that any dismantling and re-assembly or transportation of that filling machine to the position in which it is to be used could not, in his opinion, affect the accuracy or functioning of that filling machine, shall not be tested, passed as fit for use for trade and stamped unless it has been completely erected ready for use and installed in the position in which it is to be used.

(3)

For the purposes of the performance by an inspector of his functions under the Act or these Regulations relating to inspection, testing, passing as fit for use for trade and stamping of any filling machine, a person submitting such a machine to an inspector or who an inspector has reasonable cause to believe has control of such a machine for use for trade shall, if requested, provide for the inspector's use such material as the inspector may reasonably require, and any material so provided shall be returned to the person in question.

Annotations

Textual amendments

F1

Words in reg. 22(2) inserted (17.3.2000) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 2000 (S.I. 2000/387), regs. 1, 2(2)

Commencement

I1

Reg. 22 in force at 1.9.1986, see reg. 1