OpenLegislation

Regulation 32A Discontinuous totalisers imported from a member State or an EEA StateF1F5

Original text. Later amendments are not shown.

(1)

In relation to discontinuous totalisers imported into Great Britain from F2a member State or from an EEA State, subject to paragraph (4) below, an inspector shall not carry out any test in accordance with the foregoing provisions of this Part of these Regulations if, together with the discontinuous totalisers being imported, he is presented with the requisite documentation.

(2)

In this regulation and in regulation 34 below—

(a)

“requisite documentation” means—

(i)

the test report of an approved body that the discontinuous totalisers which are the subject of that report have been tested on the same basis as those set out in this Part of these Regulations and stating which tests have been applied to them; and

(ii)

the test results relating to those tests; and

(b)

“EEA State” means a State which is a Contracting Party to the EEA Agreement F3...; and in this paragraph “the EEA Agreement” means the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993.

(F43)

A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of discontinuous totalisers or is a laboratory which has been accredited for the purposes of testing discontinuous totalisers in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000.

(4)

Nothing in these Regulations shall prevent an inspector testing in accordance with the foregoing provisions of this Part of these Regulations where he is not satisfied—

(a)

as to the authenticity of the test report or the results presented to him; or

(b)

that the test results presented to him are results which in fact relate to the discontinuous totalisers being imported; or

(c)

that the discontinuous totalisers have not been dismantled after the tests to which the test report relates were carried out.

Annotations

Textual amendments

F1

Reg. 32A inserted (29.4.1996) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996 (S.I. 1996/797), regs. 1, 8

F2

Words in reg. 32A(1) substituted (31.12.2020) by The Weighing and Measuring Equipment and Meters (Amendment of Secondary Legislation) (EU Exit) Regulations 2018 (S.I. 2018/1387), reg. 1(2), Sch. para. 3(3)(b); 2020 c. 1, Sch. 5 para. 1(1)

F3

Words in reg. 32A(2)(b) omitted (31.12.2020) by virtue of The Weighing and Measuring Equipment and Meters (Amendment of Secondary Legislation) (EU Exit) Regulations 2018 (S.I. 2018/1387), reg. 1(2), Sch. para. 3(3)(c); 2020 c. 1, Sch. 5 para. 1(1)

F4

Reg. 32A(3) substituted (28.2.2003) by The Weights and Measures (Standards Amendment)Regulations 2003 (S.I. 2003/214), reg. 1, Sch. para. 2(ii)

F5

Words in reg. 32A heading substituted (31.12.2020) by The Weighing and Measuring Equipment and Meters (Amendment of Secondary Legislation) (EU Exit) Regulations 2018 (S.I. 2018/1387), reg. 1(2), Sch. para. 3(3)(a); 2020 c. 1, Sch. 5 para. 1(1)