OpenLegislation

Regulation 35 I1

England, Wales and Scotland

Original text. Later amendments are not shown.

F1(1)

The stamp shall be placed on the plug or stud referred to in sub-paragraph (a) of regulation 13 above or on any sealing device required by the arrangements referred to in sub-paragraph (b) of that regulation.

(2)

No automatic weighing machine shall be stamped in accordance with paragraph (1) above if it bears any mark which, in the opinion of the inspector, might reasonably be mistaken for the stamp, or any statement or mark (other than an inspector's stamp) which purports to be or, in the opinion of the inspector, might reasonably be mistaken for an expression of approval or guarantee of accuracy by any body or person.

Annotations

Textual amendments

F1

Reg. 35(1) substituted (29.4.1996) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996 (S.I. 1996/797), regs. 1, 11

Commencement

I1

Reg. 35 in force at 1.9.1986, see reg. 1