Regulation 26 Terms, provisions and limitations for non-fixed installationsI1

United Kingdom

(1)

The exemption provided for in regulation 24 shall also apply to ultra-wideband equipment which is a material sensing device and which complies with the requirements of paragraphs (2) to (4) of this regulation.

(2)

The ultra-wideband equipment must—

(a)

only have the transmitter turned on by a manually operated non-locking switch;

(b)

be in contact with or in close proximity to the investigated material; and

(c)

direct the emissions into the direction of the object of the analysis.

(3)

the ultra-wideband equipment must not cause or contribute to undue interference to other users of the electromagnetic spectrum.

(4)

The ultra-wideband equipment must only emit signals F1... which—

(a)

are kept to a minimum; and

(b)

if the equipment were to be placed on a representative wall F2(as defined within ETSI EN 302 065-4)F3 would be in accordance with the condition in regulation 28.

Annotations

Textual amendments

F1: Words in reg. 26(4) omitted (6.2.2018) by virtue of The Wireless Telegraphy (Ultra-Wideband Equipment) (Exemption) (Amendment) Regulations 2018 (S.I. 2018/44), regs. 1, 2(4)(a)
F2: Words in reg. 26(4)(b) substituted (6.2.2018) by The Wireless Telegraphy (Ultra-Wideband Equipment) (Exemption) (Amendment) Regulations 2018 (S.I. 2018/44), regs. 1, 2(4)(b)(i)
F3: Reg. 26(4)(b) footnotes omitted (6.2.2018) by virtue of The Wireless Telegraphy (Ultra-Wideband Equipment) (Exemption) (Amendment) Regulations 2018 (S.I. 2018/44), regs. 1, 2(4)(b)(ii)

Commencement

I1: Reg. 26 in force at 25.3.2015, see reg. 1