The Aerosol Dispensers Regulations 2009
S.I. 2009/2824 · Made 21 October 2009 · Extends to United Kingdom
Consumer Protection
Made 21st October 2009
Laid before Parliament 26th October 2009
Coming into force 29th April 2010
The Secretary of State is a Minister designated M1 for the purposes of section 2(2) of the European Communities Act 1972 M2 in relation to measures relating to consumer protection.
In accordance with section 11(5) of the Consumer Protection Act 1987 M3 the Secretary of State has consulted such organisations as appear to him to be representative of interests substantially affected by the following Regulations, such other persons as he considered appropriate and the Health and Safety Executive.
The Secretary of State makes regulations 3(8)(b) and (c), 6 and 7 in exercise of the powers conferred by section 2(2) of the European Communities Act 1972 and all other provisions in these Regulations in exercise of the powers conferred by section 11 of the Consumer Protection Act 1987 M4.
Annotations to the whole text
Marginal citations
- M1
- M2
1972 c.68. Section 2(2) was amended by section 27(1)(a) of the Legislative and Regulatory Reform Act 2006 (c.51).
- M3
1987 c.43. Section 11(5) was amended by S.I. 2008/960, article 22, schedule 3.
- M4
Section 11(1) was amended by S.I. 2005/1803, regulation 46(1) and (3).
Contents
- Part 1: GENERAL
- 1Citation and Commencement
- 2Interpretation
- 3Requirements for the marking of aerosol dispensers
- 3APower to amend Schedule 1A
- Part 2: PROHIBITIONS
- 4Prohibition of sale or supply of unmarked relevant aerosol dispensers
- 5Prohibition of sale or supply of non-compliant marked aerosol dispensers
- 5AObligations that are met by complying with obligations in the Directive
- 5BQualifying Northern Ireland Goods
- Part 3: SUPPLEMENTARY
- 6Contravention of these Regulations
- 7Amendments
- 8Transitional provision
- 9Review
- Signature
- Schedule: Revocations and Amendment
- 1Aerosol Dispensers (EEC Requirements) Regulations 1977
- 2Aerosol Dispensers (EEC Requirements) (Amendment) Regulations 1981
- 3Aerosol Dispensers (EEC Requirements) and the Cosmetic Products (Amendment) Regulations 1985
- 4Aerosol Dispensers (EEC Requirements) (Amendment) Regulations 1996
- 5Legislative and Regulatory Reform (Regulatory Functions) Order 2007
- Schedule 1A: (Annex to the Directive)
- 1Paragraph 1
- 1.0Paragraph 1.0
- 1.1Pressures
- 1.2Test pressure
- 1.3Bursting pressure
- 1.4Total capacity of the container
- 1.5Net capacity
- 1.6Volume of liquid phase
- 1.7Test conditions
- 1.7aSubstance
- 1.7bMixture
- 1.8Flammable contents
- 1.9Flammable aerosols
- 1.9.1Flammable spray aerosols
- 1.9.2Flammable foam aerosols
- 1.10Chemical Heat of Combustion
- 2GENERAL PROVISIONS
- 2.1Construction and equipment Repealed
- 2.1.1Paragraph 2.1.1
- 2.1.2Paragraph 2.1.2
- 2.1.3Paragraph 2.1.3
- 2.2Labelling
- 2.3Volume of the liquid phase
- 3SPECIAL PROVISIONS FOR METAL AEROSOL DISPENSERS Repealed
- 3.1Capacity
- 3.1.1Test pressure of the container
- 3.1.2Paragraph 3.1.2
- 4SPECIAL PROVISIONS FOR GLASS AEROSOL DISPENSERS Repealed
- 4.1Plastic coated or permanently protected containers
- 4.1.1Capacity
- 4.1.2Coating
- 4.1.3Test pressure of the container
- 4.1.4Filling
- 4.2Unprotected glass containers
- 4.2.1Capacity
- 4.2.2Test pressure of the container
- 4.2.3Filling
- 5SPECIAL PROVISIONS APPLYING TO PLASTIC AEROSOL DISPENSERS Repealed
- 5.1Paragraph 5.1
- 5.2Paragraph 5.2
- 6TESTS Repealed
- 6.1Test requirements to be guaranteed by the person responsible for marketing the aerosol dispenser Repealed
- 6.1.1Hydraulic test on empty containers Repealed
- 6.1.1.1Paragraph 6.1.1.1
- 6.1.1.2Paragraph 6.1.1.2
- 6.1.2Bursting test for empty metal containers
- 6.1.3Dropping test for protected glass containers
- 6.1.4Final inspection of filled aerosol dispensers Repealed
- 6.1.4.1Paragraph 6.1.4.1
- 6.1.4.2Paragraph 6.1.4.2
- 6.1.4.3Paragraph 6.1.4.3
- 6.2Examples of inspection tests which may be carried out Repealed
- 6.2.1Test on unfilled containers
- 6.2.2Tests on filled aerosol dispensers
- 6.3Tests on the flammability of aerosols Repealed
- 6.3.1Ignition distance test for spray aerosols Repealed
- 6.3.1.1Introduction Repealed
- 6.3.1.1.1Paragraph 6.3.1.1.1
- 6.3.1.1.2Paragraph 6.3.1.1.2
- 6.3.1.2Apparatus and material Repealed
- 6.3.1.2.1Paragraph 6.3.1.2.1
- 6.3.1.3Procedure Repealed
- 6.3.1.3.1General requirements Repealed
- 6.3.1.3.1.1Paragraph 6.3.1.3.1.1
- 6.3.1.3.1.2Paragraph 6.3.1.3.1.2
- 6.3.1.3.1.3Paragraph 6.3.1.3.1.3
- 6.3.1.3.1.4Paragraph 6.3.1.3.1.4
- 6.3.1.3.1.5Paragraph 6.3.1.3.1.5
- 6.3.1.3.1.6Paragraph 6.3.1.3.1.6
- 6.3.1.3.2Test procedure
- 6.3.1.3.2.1Paragraph 6.3.1.3.2.1
- 6.3.1.3.2.2Paragraph 6.3.1.3.2.2
- 6.3.1.3.2.3Paragraph 6.3.1.3.2.3
- 6.3.1.4Method of assessing results Repealed
- 6.3.1.4.1Paragraph 6.3.1.4.1
- 6.3.2Enclosed space ignition test Repealed
- 6.3.2.1Introduction
- 6.3.2.2Apparatus and material Repealed
- 6.3.2.2.1Paragraph 6.3.2.2.1
- 6.3.2.2.2Preparation of test apparatus Repealed
- 6.3.2.2.2.1Paragraph 6.3.2.2.2.1
- 6.3.2.2.2.2Paragraph 6.3.2.2.2.2
- 6.3.2.3Procedure Repealed
- 6.3.2.3.1General requirements Repealed
- 6.3.2.3.1.1Paragraph 6.3.2.3.1.1
- 6.3.2.3.1.2Paragraph 6.3.2.3.1.2
- 6.3.2.3.1.3Paragraph 6.3.2.3.1.3
- 6.3.2.3.2Test procedure
- 6.3.2.4Method of assessing results Repealed
- 6.3.2.4.1Paragraph 6.3.2.4.1
- 6.3.2.4.2Paragraph 6.3.2.4.2
- 6.3.2.4.3Paragraph 6.3.2.4.3
- 6.3.3Aerosol foam flammability test Repealed
- 6.3.3.1Introduction Repealed
- 6.3.3.1.1Paragraph 6.3.3.1.1
- 6.3.3.2Apparatus and material Repealed
- 6.3.3.2.1Paragraph 6.3.3.2.1
- 6.3.3.2.2Paragraph 6.3.3.2.2
- 6.3.3.2.3Paragraph 6.3.3.2.3
- 6.3.3.3Procedure Repealed
- 6.3.3.3.1General requirements Repealed
- 6.3.3.3.1.1Paragraph 6.3.3.3.1.1
- 6.3.3.3.1.2Paragraph 6.3.3.3.1.2
- 6.3.3.3.1.3Paragraph 6.3.3.3.1.3
- 6.3.3.3.2Test procedure
- 6.3.3.4Method of assessing results Repealed
- 6.3.3.4.1Paragraph 6.3.3.4.1
- Explanatory note