Schedule 5 PARTIAL EXEMPTIONS FROM CUSTOMS DUTY SPAIN

Salmon, frozen and headless, for the processing industry for manufacture into pastes or spreads

Piked dog-fish (Squalus acanthias), fresh, chilled or frozen, whole, headless or in pieces

Saithe (Pollachius virens), salted or in brine, whole, headless or in pieces, intended for smoking or drying

Fillets of saithe (Pollachius virens or Gadus virens), salted, or in brine, intended for smoking or drying

Shrimps of the species “Royal Red” (Haliporoides sibogae or Hymenopenaeus sibogae) peeled and deep-frozen, intended for the processing industry for the manufacture of products falling within heading no. 16.05 and sub heading 1902.20.10

Krill for processing

Sweet red or green peppers, dried, dehydrated or evaporated, in pieces, with a moisture content not exceeding 9.5% but not further prepared

Purified soya-bean oil in glass bottles. Each bottle holds 10 litres of purified soya-bean oil containing by weight:

• a minimum of 8.5% and a maximum of 12% of palmitic acid esters

• a minimum of 2.5% and a maximum of 4.7% of stearic acid esters

• a minimum of 22.4% and a maximum of 29% of oleic acid esters

• a minimum of 46.6% and a maximum of 53.7% of linoleic acid esters

• a minimum of 7.4% and a maximum of 11% of linolenic acid esters

and containing

• not more than 5 millimoles of free fatty acid per kg of oil

• phosphalipids corresponding to a nitrogen content not exceeding 0.04 mg per gram of oil

The soya-bean oil covered by this description is intended for the preparation of emulsions for injections

Salmon for the processing industry for manufacture into pastes or spreads

Lobster flesh, cooked, to be used by the processing industry for the manufacture of butters based on lobster, pastes, pâtés, soups or sauces

Shrimps and prawns of the species “Pandalus borealis”, boiled in water and shelled, whether or not frozen or dried, intended for the industrial processing of products falling within heading No 1605

Aluminium hydroxide oxide in the form of pseudoboehmite

1.2-Dibromoethane

1.2-Epoxybutane

2-Chloro-4'-isobutylpropiophenone

2.2-Dichloropropionic acid

2.2-Bis(chloromethyl)trimethylene tetrakis(2-chloroethyl) bis(phosphate)

Isophthalonitrile

Methyl isocyanate

Thiofanox (ISO)

2-Chloroethylphosphonic acid

Alprazolam (INN)

Zotepine (INN)

(RS)-1-[2-(4-Chlorobenzhydryloxy)ethyl]piperidine and its salts

3.6-Dichloropyridine-2-carboxylic acid

2-Hydroxyethylammonium-3.6-di-chloropyridine-2-carboxylate

Purified collagen dispersed in a phosphate physiological saline solution whether or not containing lidocaine (INN)

Tanning extracts of eucalyptus

Tetrakis(2-chloroethyl) ethylene bis(phosphate)

Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight not less than 70% and not more than 78% dialuminium trioxide and not less than 19% and not more than 26% zirconium dioxide

Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight not less than 54% and not more than 62% dialuminium trioxide and not less than 36% and not more than 44% zirconium dioxide

Thermosetting resin arising from the alkali-catalyzed polycondensation of phenol and formaldehyde, in one of the forms mentioned in note 6 (b) to Chapter 39

Polyester film, dyed in the mass of a thickness of not more than 15 micrometres and metallized on one side

Polyethylene oxide having a molecular weight of not less than 4,000,000

Poly(vinyl butyral) film having a graduated coloured band

Terpolymer of ethylene, methyl actylate and a monomer containing a non-terminal carboxy group as a substitutent, whether or not compounded with silica

Copolymers of vinyl alcohol with ethylene, in one of the forms mentioned in note 6 (b) to Chapter 39

Ethylhydroxy-ethylcellulose, insoluble in water

Yarn of poly(p-phenylene terephthalamide) for uses other than for the manufacture of tyres or of products used in the manufacture of tyres

Unbleached linen yarn (excluding yarn of flax tow), measuring per kilogram 30,000 m or less, for the manufacture of multiple or cabled yarns of the footwear industry or for whipping cable (a)

Textile fibres containing not less than 85% by weight of fibres of aromatic polyamides obtained by the polycondensation ofm-phenylenediamine and isophthalic acid and not less than 1% and not more than 15% by weight of fibres of poly (p-phenylene terephthalamide)

Fibres of poly(p-phenylene terephthalamide)

Yarns obtained from continuous spun glass filaments having a diameter of not less than 12.5 micrometres and not more than 13.5 micrometres treated with resorcinolformaldehyde, of not less than 340 tex and not more than 680 tex

Dynamic, random-access memories of N-MOS technology (N-MOS D-RAMs) with a storage capacity of 256 K bits, in the form of a monolithic integrated circuit contained in a housing whose exterior dimensions do not exceed 17×34 mm, with not more than 20 connecting pins or contact areas and bearing:

• an identification marking either consisting of or including one of the following combinations of figures and letters:

  • 41245

  • TMM 4256 AP

  • PD41256 D

  • TMM 4256 P

  • TMM 41257

  • MCM 4256 S

  • TMS 4256

  • TMS 4257

  • MCM 4267S

  • HMSO 257

  • MCM 6256

  • MCM 6257

  • 81256

  • 81257

  • 82256

  or

• other identification markings relating to N-MOS D-RAMs complying with the above mentioned description

Static, random-access memories (S-RAMs), with a storage capacity of 16K×1bit, a maximum access time of 35 ns and a standby power of not more than 150 milliwatts, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×33 mm, with not more than 20 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letters:

  • HM 6267 HP-35

  • MCM 2016-35

  • MB 81C 67-35

  or

• other identification markings relating to S-RAMs complying with the abovementioned description

Static, random-access memories of N-MOS technology (N-MOS, S-RAMs) with a storage capacity of 2 K×8 bits and a maximum access time of 45 ns, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×33 mm, with not more than 24 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combinations of figures and letters:

  • TMM 2018 H-35

  • TMM 2018 H-45

  • 65161

  • 65162

  or

• other identification markings relating to N-MOS S-RAMs complying with the above-mentioned description

Programmable, non-erasable, read-only memories (PROMs) of Schottky TTL technology, with a storage capacity of 2 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins or contact areas, and bearing:

• an identification marking either consisting of one of the following combinations of figures or figures and letters or including one of those combinations:

  • 27 S 12

  • 5305

  • 6305

  • 27 S 13

  • 5306

  • 6306

  • 5308

  • 6308

  • 28 L 22

  • 5309

  • 6309

  • 28 LA 22

  • 53 S 240

  • 63 S 240

  • 28 L2 XMFC

  • 53 S 241

  • 63 S 241

  • 6335

  • 29613

  • 54 S 570

  • 6336

  • 29770

  • 54 S 571

  • 29771

  • 7053

  • 5604

  • 7058

  • 76 LS 03

  • 7620

  • 7621

  • 82 S 114

  • 82 S 130

  • 82 S 131

  • 93436

  • 93446

  • 38510

  • 5624

  • 74 S 570

  • 74 S 571

  • MB 7115

  • MB 7116

  • MB 7117

  • MB 7118

  or

• other identification markings relating to PROMs complying with the abovementioned description

UV-erasable, programmable, read-only memories (EPROMs) with storage capacity of 16 K×8 bits, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 17×39 mm, with a quartz window on the upper surface and bearing:

• an identification marking either consisting of or including the following combination of figures:

  • 27128

  or

• other identification markings relating to EPROMs complying with the abovementioned description

Static, random-access memories of N-MOS (including H-MOS) technology (N-MOS-S-RAMs) with a storage capacity of 1 K×4 bits and access time not exceeding 70 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combinations of figures and letters:

  • AM 2149

  • PD 2149

  • SY 2149 H

  • TMS 2149

  or

• other identification markings relating to N-MOS S-RAMs complying with the abovementioned description

Field programmable array logics (PALs) of bipolar technology, in the form of a monolithic integrated circuit, with fusible links, a programmable AND array, fixed OR array, not more than 20 inputs and not more than 10 outputs, whether or not with registers, contained in a housing the exterior dimensions of which do not exceed 19×39 mm, with not more than 28 connecting pins and bearing:

• an identification marking either consisting of or including the following combinations of figures and letters:

  • 10 H 8

  • 16 A 4

  • 18 L 4

  • 10 L 8

  • 16 C 1

  • 16 H 2

  • 20 C 1

  • 12 H 6

  • 16 L 2

  • 20 L 2

  • 12 L 6

  • 16 L 6

  • 20 L 10

  • 20 R 4

  • 12 L 10

  • 16 L 8

  • 20 X 4

  • 16 R 4

  • 20 X 8

  • 14 H 4

  • 16 R 6

  • 20 X 10

  • 14 L 4

  • 16 R 8

  • 14 L 8

  • 16 X 4

  or

• other identification markings relating to PALs complying with the abovementioned description

Programmable, non-erasable, logic circuits (field programmable logic array) of TTL Schottky technology, with not more than 48 AND functions, not more than eight OR functions, and not more than 16 inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combinations of figures or figures and letters:

  • FP 54 AS 839

  • FP 74 AS 839

  • FP 54 AS 840

  • FP 74 AS 840

  • SN 54 LS 333

  • SN 74 LS 333

  • SN 54 LS 334

  • SN 74 LS 334

  • SN 54 LS 335

  • SN 74 LS 335

  • SN 54 LS 336

  • SN 74 LS 336

  • 82 S 100

  • 82 S 101

  • 93458

  • 93459

  or

• other identification markings relating to programmable field logic arrays complying with the above-mentioned description

N-MOS (including H-MOS) programmable communication interfaces (N-MOS PCIs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letter:

  • 8251 A

  or

• other identification markings relating to N-MOS PCIs complying with the abovementioned description

N-MOS (including H-MOS) programmable interval timers (N-MOS PITs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combination of figures:

  • 8253

  • 8254

  or

• other identification markings relating to N-MOS PITs complying with the abovementioned description

Universal Synchronous/Asynchronous Receiver/Transmitter (USART) of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letters:

  • MSM 82 C 51

  or

• other identification markings relating to Universal Synchronous/Asynchronous Receiver/Transmitters complying with the above-mentioned description

8 bit microprocessor of N-MOS (including H-MOS) technology with 16 bit internal architecture, in the form of a monolithic integrated circuit consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and peripheral chip select, a programmable wait state generator and a local bus controller, contained in a housing the dimensions of which do not exceed 30×30 mm with not more than 68 contact areas, and bearing:

• an identification marking consisting of or including the following combination of figures:

  • 80188

  or

• other identification markings relating to microprocessors complying with the above-mentioned description

Subscriber line audio-processing circuit (SLAC) with two digital signal processors, an analogue-digital converter and a digital-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm with not more than 28 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combinations of figures and letters:

  • AM 7901

  • AM 7905

  or

• other identification markings relating to SLACs complying with the abovementioned description

Monolithic integrated circuit in the form of pulse code modulation (PCM) of N-MOS (including H-MOS) technology, with encoding decoding and filter functions and a maximum data clock frequency of more than 3.5 MHz, contained in a housing the exterior dimensions of which do not exceed 8×26 mm, with not more than 20 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures:

  • 2913

  or

• other identification markings relating to integrated circuits complying with the above-mentioned description

Single-chip microcomputers in C-MOS technology, in the form of a monolithic integrated circuit consisting of an ALU with a storage capacity of 8 bits with a ROM with a storage capacity of 128 K bits and a RAM with a storage capacity of 2 K bits, contained in a housing the exterior dimensions of which are not less than 20×26 mm, with a minimum of 80 connecting pins and bearing:

• an identification marking either consisting of or including the following combinations of figures and letters:

  • HD 6301 Y

  or

• other identification markings relating to single-chip micro-computers complying with the abovementioned description

Dynamic, random-access read/write memory of N-MOS (including H-MOS) technology, (N-MOS D-RAMs) with a storage capacity of 64 K×4 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 20 connecting pins or contact areas arranged in 2 parallel lines (dual-in-line package) and bearing:

• an identification marking consisting of or including one of the following combination of figures and letters:

  • TMS4464

  • PD41254

  • MSM4464

  • HM50464

  • PD41464

  • TMM41464

  • MB81464

  or

• other identification markings relating to N-MOS D-RAMS complying with the abovementioned description

16 bit microprocessor in N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and external chip selection logic, a programmable wait state generator with bus control unit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connecting pins and bearing:

• an identification marking consisting of or including the following combination of figures:

  • 80186

  or

• other identification markings relations to microprocessors complying with the above description

Circuit for the control of floppy discs (floppy disc controller) of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing:

• an identification marking consisting of or including one of the following combinations of letters and figures:

  • FE 2100

  • G 70360-33

  or

• other identification markings relating to adaptor circuits complying with the abovementioned description

Pulse code modulation (PCM) Codec and filter of NMOS (including H-MOS technology), in the form of a monolithic integrated circuit, consisting of a fully integrated PCM Codec with transmit/receive filters, contained in a housing the exterior dimensions of which do not exceed 10×23 mm, with not more than 16 connecting pins and bearing:

• an identification marking either consisting of or including one of the following combinations of figures:

  • 2916

  • 2917

  or

• other identification markings relating to PCM Codec and filter devices complying with the abovementioned description

Electronic circuit for synchronizing signals between the user and the exchange in a telephone system, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×37 mm, with not more than 28 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letters:

  • QMV 18 CW 1

  or

• other identification markings relating to microcircuits complying with the abovementioned description

Monolithic integrated circuit for scanning and distributing logic signals, for use in telephone exchanges, contained in a housing the exterior dimensions of which do not exceed 14×53 mm, with not more than 40 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letters:

  • QMV 16 BW 1

  or

• other identification markings relating to integrated circuits complying with the abovementioned description

Monolithic integrated interface circuit for pulse code modulation (PCM), of C-MOS technology, with encoding, decoding and filtering functions and a processing frequency of 2,565 MHz, contained in a housing the exterior dimensions of which do not exceed 10×28 mm, with not more than 22 connecting pins and bearing:

• an identification marking either consisting of or including the following combination of figures and letters:

  • QMV 81 AD 1

  or

• other identification markings relating to integrated circuits complying with the abovementioned description

Liquid crystal devices (LCD), whose external dimensions do not exceed 40×154 mm with not more than 192 contact areas, consisting of a layer of liquid crystal between two glass sheets or plates with a minimum of 7 and a maximum of 32 figures or letters, and bearing:

• an identificatiion marking either consisting of one of the following combination of figures or including one of those combinations, from 1000000-0001 to 9999999-9999

  or

• other identification markings relating to liquid crystal devices complying with the abovementioned description

Portable reading appliance for the visually handicapped in which a fibre optic camera transmits a magnified image on to a display screen, and parts thereof