OpenLegislation

Regulation 4 Amendment of regulation 4

Original text. Later amendments are not shown.

In regulation 4—

(1)

in paragraph (1), for “, (3)”, substitute “to (3C)”;

(2)

for paragraph (3), substitute—

“(3)

Paragraph (3A) applies to a transformer in respect of which it is reasonable to assume that it contains—

(a)

0.005% by weight, or less, of PCBs within the fluids containing PCBs; or

(b)

a total volume of 0.05dm3, or less, of fluids containing PCBs.

(3A)

A transformer to which this paragraph applies—

(a)

may be held until the end of its useful life; and

(b)

must then be decontaminated in accordance with paragraph (4)(b) to (d), or disposed of, as soon as possible.

(3B)

Paragraph (3C) applies to a transformer in respect of which it is reasonable to assume that it contains—

(a)

more than 0.005% but no more than 0.05% by weight of PCBs within the fluids containing PCBs; and

(b)

a total volume of more than 0.05dm3 of PCBs fluids containing PCBs.

(3C)

A transformer to which this paragraph applies—

(a)

may be held until the end of 31st December 2025; and

(b)

must then be decontaminated in accordance with paragraph (4)(b) to (d), or disposed of, as soon as possible.”

(3)

in paragraph (4)(a), for “less than 0.05% by weight and, if possible, to no more than 0.005% by weight” substitute “0.005% by weight, or less, or to reduce the total volume of fluids containing PCBs to 0.05dm3, or less”.

(4)

In regulation 4(8)—

(i)

in sub-paragraph (a), for “, (3)” substitute “to (3C)”;

(ii)

in sub-paragraphs (b) and (c), for “not contaminated”, in both places it occurs, substitute “relevant”;

(iii)

after paragraph (8) insert—

“(9)

In paragraph (8), “relevant equipment” means any equipment (including any capacitor or receptacle containing residual stocks) which—

(a)

contains PCBs; or

(b)

having contained PCBs, has not been decontaminated, other than one which contains a total volume of PCBs exceeding 0.05dm3.

(10)

For the purposes of paragraph (9)—

(a)

the PCB volume of a power capacitor shall be measured by reference to all of the separate elements of a combined set; and

(b)

anything of a type which may contain PCBs shall be treated as containing PCBs unless it is reasonable to assume the contrary.”