Regulation 14 Non-compliance of vehicles or vehicle types with essential requirements
Where a railway undertaking finds, during operation, that a vehicle it is using does not meet one of the applicable essential requirements, it must take the necessary corrective measures in order to bring the vehicle into conformity.
Where a railway undertaking takes corrective measures under paragraph (1), it may inform the DFI, the European Union Agency for Railways and any national safety authorities in other relevant States concerned of the measures taken.
Where the railway undertaking has evidence that the non-compliance existed at the time the authorisation for placing the vehicle on the market of a relevant State was issued, it must inform the DFI, the European Union Agency for Railways and any other national safety authorities in other relevant States concerned.
Where the DFI becomes aware that a vehicle or a vehicle type for which an authorisation for placing on the market of a relevant State has been issued does not meet one of the applicable essential requirements, it must inform the railway undertaking using the vehicle and require it to take the necessary corrective measures in order to bring the vehicle or vehicle type into conformity.
Where the DFI has become aware of the non-conformity of a vehicle or vehicle type in accordance with paragraph (4), it must inform the European Union Agency for Railways and any national safety authorities in other relevant States concerned including those where an application for authorisation for placing on the market of a relevant State for a vehicle of the same type is ongoing.
Where the DFI becomes aware that—
corrective measures taken by a railway undertaking or imposed by the DFI in accordance with paragraph (1) or (4) do not ensure conformity with the applicable essential requirements, and
the non-conformity leads to a serious safety risk,
the DFI may apply temporary safety measures.
The DFI, following a review of the effectiveness of any measures imposed by it in accordance with paragraph (6) to address a serious safety risk, may decide to—
revoke the authorisation it issued for the placing on the market of the vehicle in respect of which temporary safety measures have been taken, or
amend the authorisation it issued for the placing on the market of the vehicle in respect of which temporary safety measures have been taken,
where there is evidence that the vehicle did not meet one of the applicable essential requirements at the time when the authorisation for placing the vehicle on the market was issued.
The DFI must, where it revokes or amends any authorisation it has issued, update any relevant registers and notify the railway undertakings using vehicles of the same type as the vehicle or type subject to the revocation or amendment that the revocation or amendment has taken place.
A railway undertaking receiving a notification in respect of its vehicles under paragraph (8) must assess the compliance of those vehicles with the essential requirements and where non-compliance is established must take corrective measures in accordance with paragraph (1).
Where the non-compliance with essential requirements described in paragraph (1) or (4) is limited to an identifiable part of a vehicle’s area of use, the authorisation may be amended to omit such a part.
A vehicle in respect of which an authorisation described in paragraph (7) has been revoked must not be used unless a new authorisation to place that vehicle on the market has been granted further to regulation 10 or Article 21 of the 2016 Directive.
In this regulation—
-
“placing on the market of a relevant State” means the first making available of a vehicle, ready to function in its design operating state, on the market in a relevant State, and cognate expressions are to be construed accordingly;
-
“temporary safety measures” includes the suspension of type authorisation of a vehicle.