Regulation 59 Enforcement action in respect of formal non-complianceI1
England, Wales and Scotland
Where the market surveillance authority makes one of the following findings relating to a product, it must require a relevant economic operator to remedy the non-compliance concerned within a specified period—
the F1UK marking—
where required, has not been affixed;
has been affixed otherwise than in accordance with regulations 36 (prohibition on improper use of UK marking) and 41 (UK marking);
the technical documentation is either not available or not complete;
the following product information has not been affixed or has been affixed otherwise than in accordance with paragraph 5 of Schedule 1—
specific marking of explosion protection in accordance with paragraph 5(1)(f) of Schedule 1;
the symbols of the equipment-group and category in accordance with paragraph 5(1)(g) of Schedule 1;
where applicable, the other markings and information required by paragraph 5(1) of Schedule 1;
any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.
The market surveillance authority must not take any enforcement action against the relevant economic operator under these Regulations in respect of the non-compliance concerned until the period referred to in paragraph (1) has elapsed.
Where the non-compliance referred to in paragraph (1) persists, the market surveillance authority must take appropriate measures to—
restrict or prohibit the product being made available on the market,
ensure that the product is withdrawn, or
ensure that the product is recalled.
This regulation does not apply where a product presents a risk.
Annotations
Textual amendments
- F1
Word in reg. 59(1)(a) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 32(a) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
- F2
Words in reg. 59(1)(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 32(b) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
- F3
Word in reg. 59(1)(c) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 32(c) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
- F4
Word in reg. 59(1)(c)(ii) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 32(a) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Commencement
- I1
Reg. 59 in force at 8.12.2016, see reg. 1(1)