Regulation 6 Technical documentation and conformity assessmentI1

England, Wales and Scotland

Before placing a product on the market or using it for their own purposes, a manufacturer must—

(a)

carry out the relevant conformity assessment procedure or have a relevant conformity assessment procedure carried out; and

F1(b)

draw up the technical documentation referred to—

(i)

for a product in respect of which the conformity assessment procedure in regulation 39(1)(a) is being carried out, in paragraph 3(c) of Part 1 of Schedule 3A to these Regulations;

(ii)

for a product in respect of which the conformity assessment procedure in regulation 39(1)(b) is being carried out, in paragraph 3(c) of Part 1 of Schedule 3A to these Regulations;

(iii)

for a product in respect of which the conformity assessment procedure in regulation 39(1)(c) is being carried out, in paragraph 2 of Part 6 of Schedule 3A to these Regulations;

(iv)

for a product in respect of which the conformity assessment procedure in regulation 39(1)(d) is being carried out, in paragraph 2 of Part 7 of Schedule 3A to these Regulations.

Annotations

Textual amendments

F1: Reg. 6(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 5 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement

I1: Reg. 6 in force at 8.12.2016, see reg. 1(1)