Regulation 9 Compliance procedures for series productionI1

England, Wales and Scotland

(1)

A manufacturer of a product which is manufactured by series production must ensure that, before placing a product on the market, procedures are in place to ensure that any product so manufactured will be in conformity with Part 2.

(2)

In doing so, the manufacturer must take adequate account of—

(a)

any change in the product design or characteristics, and

(b)

any change in a F1designated standard or in another technical specification by reference to which the F2... declaration of conformity or attestation of conformity was drawn up.

Annotations

Textual amendments

F1: Word in reg. 9(2)(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 8(a) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2: Word in reg. 9(2)(b) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 8(b) (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement

I1: Reg. 9 in force at 8.12.2016, see reg. 1(1)