Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (Northern Ireland) 1996
S.R. 1996/247 · Made 24 June 1996 · Extends to Northern Ireland
HEALTH AND SAFETY
Made 24th June 1996
Coming into operation 29th July 1996
The Department of Economic Development, being a Department designatedf1 for the purposes of section 2(2) of the European Communities Act 1972f2 in relation to measures relating to equipment and protective systems intended for use in potentially explosive atmospheres, in exercise of the powers conferred on it by that section and of every other power enabling it in that behalf, hereby makes the following Regulations:
Annotations to the whole text
Footnotes
- f1
- f2
Contents
- Part I: Preliminary
- 1Citation, commencement and revocations
- 2Interpretation
- Part II: Application
- 3Equipment, protective systems, devices and components
- 4Excluded equipment, protective systems, devices and components
- 5Exclusion until 30th June 2003 of equipment and protective systems complying with health and safety provisions in operation on 23rd March 1994
- Part III: General Requirements
- 6General duty relating to the placing on the market of equipment, protective systems or devices by a responsible person
- 7General duty relating to the supply of equipment, protective systems or devices by a person other than the responsible person
- 8General duty relating to the placing on the market of components by a responsible person
- 9Exceptions to placing on the market in respect of certain equipment, protective systems, devices and components
- 10Conformity assessment procedures
- 11Notified bodies
- 12Notified bodies appointed by the Department
- 13Fees
- Part Supplementary Provisions
- 14Conditions for equipment, protective systems, devices and components being taken to comply with the provisions of the ATEX Directive
- Part IV: Enforcement
- 15Application of Schedule 13
- 16Offences and penalties
- 17Defence of due diligence
- 18Liability of persons other than the principal offender
- 19Amendment of the Electricity at Work Regulations (Northern Ireland) 1991
- 20Consequential amendment of the Provision and Use of Work Equipment Regulations (Northern Ireland) 1993
- Signature
- Schedule 1: The CE marking and other inscriptions
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- 4Paragraph 4
- 5Paragraph 5
- 6Paragraph 6
- 7Paragraph 7
- 8Paragraph 8
- 9Paragraph 9
- Schedule 2: Essential health and safety requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres
- APreliminary observations
- BPreliminary observations
- 1Preliminary observations
- 1.0General requirements Repealed
- 1.0.1Principles of integrated explosion safety
- 1.0.2Principles of integrated explosion safety
- 1.0.3Special checking and maintenance conditions
- 1.0.4Surrounding area conditions
- 1.0.5Marking
- 1.0.6Instructions
- 1.1Selection of materials Repealed
- 1.1.1Selection of materials
- 1.1.2Selection of materials
- 1.1.3Selection of materials
- 1.2Design and construction Repealed
- 1.2.1Design and construction
- 1.2.2Design and construction
- 1.2.3Enclosed structures and prevention of leaks
- 1.2.4Dust deposits
- 1.2.5Additional means of protection
- 1.2.6Safe opening
- 1.2.7Protection against other hazards
- 1.2.8Overloading of equipment
- 1.2.9Flameproof enclosure systems
- 1.3Potential ignition sources Repealed
- 1.3.1Hazards arising from different ignition sources
- 1.3.2Hazards arising from static electricity
- 1.3.3Hazards arising from stray electric and leakage currents
- 1.3.4Hazards arising from overheating
- 1.3.5Hazards arising from pressure compensation operations
- 1.4Hazards arising from external effects Repealed
- 1.4.1Hazards arising from external effects
- 1.4.2Hazards arising from external effects
- 1.5Requirements in respect of safety-related devices Repealed
- 1.5.1Requirements in respect of safety-related devices
- 1.5.2Requirements in respect of safety-related devices
- 1.5.3Requirements in respect of safety-related devices
- 1.5.4Control and display units
- 1.5.5Requirements in respect of devices with a measuring function for explosion protection
- 1.5.6Requirements in respect of devices with a measuring function for explosion protection
- 1.5.7Requirements in respect of devices with a measuring function for explosion protection
- 1.5.8Risks arising from software
- 1.6Integration of safety requirements relating to the system Repealed
- 1.6.1Integration of safety requirements relating to the system
- 1.6.2Integration of safety requirements relating to the system
- 1.6.3Hazards arising from power failure
- 1.6.4Hazards arising from connections
- 1.6.5Placing of warning devices as parts of equipment
- 2Placing of warning devices as parts of equipment
- 2.0Requirements applicable to equipment in category M of equipment-group I Repealed
- 2.0.1Requirements applicable to equipment in category M 1 of equipment-group I Repealed
- 2.0.1.1Requirements applicable to equipment in category M 1 of equipment-group I
- 2.0.1.2Requirements applicable to equipment in category M 1 of equipment-group I
- 2.0.1.3Requirements applicable to equipment in category M 1 of equipment-group I
- 2.0.1.4Requirements applicable to equipment in category M 1 of equipment-group I
- 2.0.2Requirements applicable to equipment in category M 2 of equipment-group I Repealed
- 2.0.2.1Requirements applicable to equipment in category M 2 of equipment-group I
- 2.0.2.2Requirements applicable to equipment in category M 2 of equipment-group I
- 2.0.2.3Requirements applicable to equipment in category M 2 of equipment-group I
- 2.1Requirements applicable to equipment in category 1 of equipment-group II Repealed
- 2.1.1Explosive atmospheres caused by gases, vapours or hazes Repealed
- 2.1.1.1Explosive atmospheres caused by gases, vapours or hazes
- 2.1.1.2Explosive atmospheres caused by gases, vapours or hazes
- 2.1.1.3Explosive atmospheres caused by gases, vapours or hazes
- 2.1.2Explosive atmospheres caused by air/dust mixtures Repealed
- 2.1.2.1Explosive atmospheres caused by air/dust mixtures
- 2.1.2.2Explosive atmospheres caused by air/dust mixtures
- 2.1.2.3Explosive atmospheres caused by air/dust mixtures
- 2.1.2.4Explosive atmospheres caused by air/dust mixtures
- 2.2Requirements for category 2 of equipment-group II Repealed
- 2.2.1Explosive atmospheres caused by gases, vapours or mists Repealed
- 2.2.1.1Explosive atmospheres caused by gases, vapours or mists
- 2.2.1.2Explosive atmospheres caused by gases, vapours or mists
- 2.2.1.3Explosive atmospheres caused by gases, vapours or mists
- 2.2.2Explosive atmospheres caused by air/dust mixtures Repealed
- 2.2.2.1Explosive atmospheres caused by air/dust mixtures
- 2.2.2.2Explosive atmospheres caused by air/dust mixtures
- 2.2.2.3Explosive atmospheres caused by air/dust mixtures
- 2.2.2.4Explosive atmospheres caused by air/dust mixtures
- 2.3Requirements applicable to equipment in category 3 of equipment-group II Repealed
- 2.3.1Explosive atmospheres caused by gases, vapours or mists Repealed
- 2.3.1.1Explosive atmospheres caused by gases, vapours or mists
- 2.3.1.2Explosive atmospheres caused by gases, vapours or mists
- 2.3.2Explosive atmospheres caused by air/dust mixtures Repealed
- 2.3.2.1Explosive atmospheres caused by air/dust mixtures
- 2.3.2.2Explosive atmospheres caused by air/dust mixtures
- 2.3.2.3Explosive atmospheres caused by air/dust mixtures
- 3SUPPLEMENTARY REQUIREMENTS IN RESPECT OF PROTECTIVE SYSTEMS Repealed
- 3.0General requirements Repealed
- 3.0.1General requirements
- 3.0.2General requirements
- 3.0.3General requirements
- 3.0.4General requirements
- 3.1Planning and design Repealed
- 3.1.1Characteristics of materials
- 3.1.2Characteristics of materials
- 3.1.3Characteristics of materials
- 3.1.4Characteristics of materials
- 3.1.5Pressure-relief systems
- 3.1.6Explosion suppression systems
- 3.1.7Explosion decoupling systems
- 3.1.8Explosion decoupling systems
- Schedule 3: Criteria determining the classification of equipment-groups into categories
- 1Equipment-group I
- 2Equipment-group II
- Schedule 4Excluded equipment, protective systems and devices
- Schedule 5: Module: EC type-examination
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- 4Paragraph 4
- 4.1Paragraph 4.1
- 4.2Paragraph 4.2
- 4.3Paragraph 4.3
- 4.4Paragraph 4.4
- 5Paragraph 5
- 6Paragraph 6
- 7Paragraph 7
- 8Paragraph 8
- 9Paragraph 9
- Schedule 6: Module: Production quality assurance
- 1Paragraph 1
- 2Paragraph 2
- 3Quality system Repealed
- 3.1Quality system
- 3.2Quality system
- 3.3Quality system
- 3.4Quality system
- 4Surveillance under the responsibility of the notified body Repealed
- 4.1Surveillance under the responsibility of the notified body
- 4.2Surveillance under the responsibility of the notified body
- 4.3Surveillance under the responsibility of the notified body
- 4.4Surveillance under the responsibility of the notified body
- 5Surveillance under the responsibility of the notified body
- 6Surveillance under the responsibility of the notified body
- Schedule 7: Module: Product verification
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- 4Verification by examination and testing of each piece of equipment Repealed
- 4.1Verification by examination and testing of each piece of equipment
- 4.2Verification by examination and testing of each piece of equipment
- 4.3Verification by examination and testing of each piece of equipment
- Schedule 8: Module: Conformity to type
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- Schedule 9: Module: Product quality assurance
- 1Paragraph 1
- 2Paragraph 2
- 3Quality system Repealed
- 3.1Quality system
- 3.2Quality system
- 3.3Quality system
- 3.4Quality system
- 4Surveillance under the responsibility of the notified body Repealed
- 4.1Surveillance under the responsibility of the notified body
- 4.2Surveillance under the responsibility of the notified body
- 4.3Surveillance under the responsibility of the notified body
- 4.4Surveillance under the responsibility of the notified body
- 5Surveillance under the responsibility of the notified body
- 6Surveillance under the responsibility of the notified body
- Schedule 10: Module: Internal control of production
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- 4Paragraph 4
- 5Paragraph 5
- Schedule 11: Module: Unit verification
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- Schedule 12Content of the EC declaration of conformity
- Schedule 13: Enforcement
- 1Enforcement in relation to relevant products
- 2Forfeiture
- 4Duty of Department to inform Secretary of State of action taken
- 5Savings
- 6Interpretation
- Explanatory note